American Audio CK 1000Mp3 3. STARTING PLAYBACK - Figure 10, 4. AUTO CUE, 5. STOPPING PLAYBACK - Figures 10 & 11, 6. PAUSING

3. STARTING PLAYBACK - Figure 10

Load an audio CD as described on page 17 (loadIng/EjEctIng dIScS).

Pressing the play/pauSE Button (15) with an audio CD loaded will imme-

diately start playback. The play (47) indicator will glow as soon as playback

begins. The point at which playback starts (cue point) will automatically be

stored in the memory as the cue point. The unit will return to this cue point (the

point at which playback started) when the cuE Button (17) is pressed.

This function will automatically set a cue point to the first audio source when a

CD is loaded. The first set cue point will always be the beginning of track 1. If

a new track is selected before the play Button (15) is pressed, a new CUE

POINT will be set to reflect the new starting point.

Stopping playback will not stop the drive mechanism, but merely pause or cue

the track, this functions allows the unit to begin play instantly. The drive mecha-

nism will only stop if a disc is ejected or the unit has gone in to sleep mode.

There are two ways to stop (pause) playback:

1) Press the play/pauSE Button (15) during playback. This will pause play-

back at the exact same point the play/pauSE Button (15) was pressed.

2) Press the cuE Button (17) during playback. This will pause playback and

return the track to the last set cue point.

This function pauses playback at the exact same point the play/pauSE

Button (15) was pressed. Pressing the play/pauSE Button (15) will switch

between play and pause modes. When the unit is in pause mode the pauSE

IndIcator (47) in the lcd dISplay (21) will glow. The play/pauSE Button

(15) LED will also begin to flash repeatedly.

7. FRAmE SEARCH

This feature allows you to scroll through a track frame by frame, allowing you

to find and set a starting cue or loop point. To use the scroll function you must

first be in Pause Mode or Cue Mode. Once you are in Pause or Cue mode, turn

the jog WHEEl (12) to scroll through the track (Figure 12). Turning the wheel in

a clockwise direction will advance the frame search and turning the wheel in a

counter-clockwise direction rewinds the frame search. When you use the jog

WHEEl (12) the monitor (headphone level) function allows you to here what you

are scrolling through. Once you reach your desired starting point you can set a

cue (starting) point by pressing the play/pauSE Button (15) as in Figure 10.

Pressing the cuE Button (17) as in Figure 11 will now return you to the point

you just set.

BASIC OPERATIONS (CONT.)

Figure 10

Figure 11

Figure 12