| Controls and Features Cont. |
|
|
Rear Panel
15 |
|
|
| 16 |
| 17 | 18 |
|
19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 |
15.AC VOLTAGE SELECTOR - This switch is used to adjust the operating voltage. Operating voltage can be toggled between 115V/50Hz or 230V/60Hz. Always be sure the selector is set to the proper voltage for your area before attempting to operate the unit.
16.PLAYER CONTROL - These jacks are used to control the
17.LIGHT CONTROL - This jack provides a preset mono audio signal output. There is no way to adjust this level, however this level will directly reflect the output level of the Channel Faders (3). This buffered audio output should only be used for light controllers that can accept an external audio input. Great for Touch Panels and Chase Controllers. Buffered audio output for light controllers that can use external input.
18.DJ MICROPHONE CONNECTOR - This jack is used to a connect a microphone to the mixer. Con- nect you microphone via 1/4 inch (6.3mm) jack. The signal volume will be controlled by the DJ Mic Knob
(7). The bass and treble levels can also be adjusted by the
19.AC CONNECTION - This connector is used to supply main power to the unit. Use only the supplied detachable AC power cord.
20.RCA MASTER OUTPUTS - The Master Output includes a pair of RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output signal.
©American Audio® - www.americandj.com -
