American Audio Q-D1 Technical Specications - Model: Q-D1, 2 Channel Audio Mixer.

Technical Speciﬁcations - Model: Q-D1, 2 Channel Audio Mixer.

POWER SUPPLY: AC 9v/1000mA.

DIMENSIONS: 192(W) * 236(D) * 82(H) mm

WEIGHT: 5.5 Lbs./2.3 Kgs

CROSSFADER: Low Residue Resistanced Crossfader.

POWER CONSUMPTION: 9 Watts Typical

HEADPHONE IMPEDANCE: 16 Ohms

ENVIRONMENTAL CONDITION: Operating Temperature 5 to 35 deg. C

Humidity 25 to 85% RH (non-condensing)

Input/Output Impedance & Sensitivity (Level/Impedence): (Master set to 0dBV output,

Load=100K OHM, maximum gain)

LINE: 10K OHM /-14dBV (200mV) +/-2dB

PHONO: 47K OHM /-50dBV (3.16mV) +/-2dB

MIC: 2.2K OHM /-60dBV (1mV) +/-2dB

MASTER: 1K OHM

REC: 1K OHM /-10dBV (316mV) +/-2dB

Maximum Input (1KHz, Master Output THD=0.5%, EQ falt, Maximum Gain)

LINE: More than +4dBV

PHONO: More than -32dBV

MIC: More than -42dBV

Maximum Output (THD=1%, Maximum Gain, EQ at center position)

MASTER (RCA): MORE THAN 18dBV (8V) at Load=100K OHM

PHONES: MORE THAN 4dBV (1.6V) at Load=32OHM

CHANNEL BALANCE: Within 3dB

Output Noise (Maximum Gain, EQ ﬂat, W/20KHz LPF, A-Weighted)

LINE: LESS THAN -90dBV

PHONO: LESS THAN -70dBV

MIC: LESS THAN -60dBV

Frequency Response (Master=0dBV output, Maximum Gain, EQ Flat)

LINE: 20-20KHz +/-1dB

PHONO: 20-20KHz +1/-1.5dB (RIAA)

MIC: 20-20KHz +1/-2dB

NOTE: 0dBV=1 Vrms

CROSS TALK: > 70dB @1Khz between left and right channels

> 70dB @1KHz between channels

Channel Equalizer:

LOW: 12+/-2dB at 100Hz

-26+/-3dB at 100Hz

TREBLE: 12+/-2dB at 10KHz

-19+/-3dB at 10KHz

Fader Maximum Attenuation

Channel Fader: More than 80dB at 1KHz

Crossfader More than 80dB at 1KHz

Q-D 1™ S PECIF ICATIONS