American Audio Q-D3 manual Power Supply

Q-D3™		Specifications
Model: Q-D3/Battle Deck, 2 Channel Mixer
POWER SUPPLY:	AC 115/230V, 50/60Hz Selectable
DIMENSIONS:	12.5”W x 10.25”D x 4”H /254 x 308 x 102.5 mm
WEIGHT:	5.5Lbs./2.8Kgs
CROSSFADER:	Feather Fader Plus - VCA detecting fader start control -
	Low grounding impedance crossfader
POWER CONSUMPTION:	5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE:	16 Ohms
ENVIRONMENTAL CONDITION:	Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
	RH (non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence): LOAD=47K OHM
LINE:	14dBV (200mV)12K Ohm +/-2dB
PHONO:	-48dBV (4mV)47K Ohms +/-3dB
MICROPHONE:	-49 dBV (3.6mV0 /3K Ohms +/-3 dB
AUX:	-14 dBV (200mV)/47K Ohms +/-2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
MASTER OUT (RCA):	0dBV (1V)/610 Ohms +/-2dB
REC OUT (RCA):	-10dBV (316mV)/2.2K Ohms +/-2dB
PHONES (LOAD=32 OHMS):	-8dBV (0.4V)/33 Oms +/-2dB
Maximum Output (Load = 47K, THD = 5%)
MASTER (RCA):	MORE THAN 18dBV (8V)
REC:	MORE THAN 18dBV (8V)
PHONES (Load=32 ohms):	MORE THAN 6dBV (2V)
CHANNEL BALANCE:	Within 3dB
Frequency Response:
LINE:	20Hz - 20KHz, ±1dB
PHONO:	20Hz - 20KHz, ±1.5dB (RIAA)
AUX:	20Hz - 20KHz, ±1dB
MICROPHONE:	20Hz - 20KHz, +1,-3dB
Output Noise (IEC-A WEIGHTED):
LINE/AUX:	LESS THAN -70dBV
PHONO:	LESS THAN -65dBV
MIC:	LESS THAN -55dBV
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
MASTER OUTPUT (LOAD = 47K OHMS):		Less than 0.2%
PHONO: (LOAD = 32 OHMS):		Less than 0.5%
CROSS TALK:	< 40dB @ 1Khz between left and right channels
Channel Equalizer:
BASS:	+12 ±1dB,-22 ±2 dB at 70KHz
MID:	+12 ±1dB,-17 ±2 dB at 1KHz
TREBLE:	+13 ±1dB,-27 ±2 dB at 13KHz
Microphone Equalizer:
BASS:	+12 ±1dB,-12 ±1 dB at 100KHz
TREBLE:	+12 ±1dB,-12 ±1 dB at 10KHz

©American Audio® - www.americandj.com - Q-D3™ Instruction Manual Page 14