©American Audio® - www.americanaudio.us - Q-FX19™ Instruction Manual Page 17
FLANGER or PITCH SHIFT effect. When the FLANGER effect is activated the button will glow green,
when the PITCH SHIFT effect is activated the button will glow red. The FLANGER effect distorts the
output signal and creates an effect similar to frequencies phasing in and out of each other. The PITCH
SHIFT effect can increase or decrease the playing speed. The effects have two adjustable parameters,
Time Array (TA) (67) and Depth Feedback (DF) (65).
72. TRANS/PAN BUTTON - This button is used to activate and deactivate either the TRANS or PAN
effect. When the TRANS effect is activated the TRANS/PAN BUTTON will glow green, when the PAN
effect is selected the button will glow red. The TRANS effect simulates a real-time mixer transformer
effect. The PAN effect allows you to pan the output from the left channel to the right channel. The
effects have two adjustable parameters, Time Array (TA) (67) and Depth Feedback (DF) (65).
73. FX SELECT BUTTTON - The FX SELECT BUTTON allows you to toggle back and forth between
the two effects banks. When the FX SELECT BUTTON is glowing green you have access to the top
bank of effects which include; trans, filter, flanger, and echo. When the FX SELECT BUTTON is glowing
red you have access to the bottom bank of effects which include; pan, pitch shift, phase, and delay. To
toggle to the next bank of effects press the FX SELECT BUTTON more then once.
74. CUE BPM/DEPTH FEEDBACK DIS PLAY - The CUE BPM display measures the BPMs of the
cued channel. The Depth Feedback digital display will indicate the parameter ratio percentage. Turning
the DEPTH FEEDBACK KNOB (65) in a clockwise direction will increase your ratio percentage. Turning
the knob in a counter-clockwise direction will decrease the ratio percentage.
75. TIME ARRAY DISPLAY - This display will signify the pitch percentage (speed). Any adjustments
will be based on this default setting. Turning the knob in a clockwise direction will increase your pitch.
Turning the knob in a counter-clockwise direction will decrease the pitch.
76. BE AT DISPLAY - This display indicates the beat ratio that has been set for an effect. The beat
ratios are 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1, and 0/0. Note: In manual mode, when reading preset
parameters, the Time Array will be the direct value that is read, so the delay time of an effect to
the beat of music may be inactive.
77. AUTO BPM INDICATOR - When AUTO BPM INDICATOR is highlighted, the unit is automatically
counting the BPMs.
78. DRY/WET DISPLAY - This display indicates the position of the DRY/WET KNOB (64).
79. BPM (BEATS PER MINUTE) DISPLAY - This meter will display the master output BPMs.
Q-FX19™ DSP EFFECT CONTROLS AND FUNCTIONS cont.