American Audio Q-FX19 - page 15

Q-FX19™ CONTROLS AND FUNCTIONS cont.
©American Audio® - www.americanaudio.us - Q-FX19™ Instruction Manual Page 15
a power cord when the ground prong has been removed or broken off. The ground prong is used to
reduce the risk of electrica l shock in case of an electrical short. This cord is designed to fit in one
direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted
properly.
Q-FX19™ DSP EFFECT CONTROLS AND FUNCTIONS
60
73
72
71
70
69
68 67 66 65
64
63
62
61
76
77
78
79
58
57
56
59
74
75
+
56. CUE LEVEL DISPLAY - This display measures the incoming source signal into a channel. This
measurment will directly reflect the channel(s) with the PFL function enguaged.
57. CHANNEL OUTPUT LEVEL INDICATOR - The indicators are used to measure incoming signal
levels. Use this indicator to visually maintain an average signal output of +4dB. A consistent average
output level of +4dB will produce a clean output signal.
58. INPUT INDICATOR - These indicators are used to give a visual representation of the effect input
selector (68). Notice: When Mic 1+2 is selected, both Mic 1 and Mic 2 will glow in the display.
59. EFFECTS INDICATOR - When any of the eight effects are in use, these indicators will glow to
match any of the eight effects that may be functioning.
60. DELAY/PHASE BUTTON - This button is used to activate and deactivate either the DELAY or
PHASE effect. When the DELAY effect is activated the DELAY/PHASE BUTTON will glow green, when
the PHASE effect is selected the button will glow red. The DELAY effect repeats the sound that was