American Audio Q-FX19

(28) must be in the "Line 3" position, to monitor any source connected to these jacks.

47. CHANNEL 4: RCA LINE INPUT JACKS - These Jacks are used for line level inputs. Connect

CD players or Tape Decks to line level inputs. Line level musical instruments with stereo outputs

such as Rhythm Machines or Samplers should also be connected to line level inputs. The red col-

ored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by the channel four fader. Do not connect turntables to these jacks,

turntables should only be connected to “Phono” inputs.

48. REC OUT - This is a low current unbalanced output source designed for various tape and CD

recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (23), it is not

inﬂuenced by the MASTER VOLUME CONTROL (18).

49. RCA MASTER OUTPUTS - The Master Output includes a pair XLR BALANCED JACKS (53)

as well as a pair of RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output

signal. These jacks should only be used for shorter cable runs to signal processors or looping to

another mixer. For cable runs greater than 15 feet use the XLR BALANCED JACKS (53).

50. PLAYER A CONTROL - This jack is used to control the “Q-Start” function between the mixer

and a compatible American Audio® or American DJ® CD Player. Using the mini plug included with

your CD player, connect from the CD player controller out jack to this jack. Player A “Q-Start” func-

tionallity will be controlled by the left side (X) of the CROSSFADER (21). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

51. PLAYER B CONTROL - This jack is used to control the “Q-Start” function between the mixer

and a compatible American Audio® or American DJ® CD Player. Using the mini plug included with

your CD player, connect from the CD player controller out jack to this jack. Player B “Q-Start” func-

tionallity will be controlled by the right side (Y) of the CROSSFADER (21). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

52. DIGITAL OUTPUT - This jack is used to send a stereo digital output siginal to a digital input

device.

53. BALANCED XLR MASTER OUTPUTS JACKS - The Master Output includes a pair of XLR

Balanced jacks as well as a pair of RCA UNBALANCED JACKS (49). The 3-pin XLR jacks send a

high current balanced output signal. These jacks should be used when you will be driving an amp or

other audio equipment with a balanced input, or whenever you will be running a signal line greater

than 15 feet. Always, use these jacks whenever possible.

54. BALANCED TRS 1/4” ZONE OUTPUT JACKS - The Zone Output includes a pair of TRS

Balanced jacks as well as a pair of RCA UNBALANCED JACKS (36). The TRS jacks send a high

current balanced output signal. These jacks should be used when you will be driving an amp or

other audio equipment with a balanced input, or whenever you will be running a signal line greater

than 15 feet. Always, use these jacks whenever possible.

55. AC CONNECTION - This connector is used to supply main power to the unit via the included

detachable power cord. The power connection uses an I.E.C. type conne ctor, use only the supplied,

polarized A C power cord. Use only a power co rd that matches this type of connectio n. Be sure to

only connect this unit to a power outlet that m atches the printed power label on the unit. Never use

Q- FX19™ CONTR OLS A ND FU NCTIO NS co nt.