American Audio Q-MX2 BPM manual Introduction, Unpacking, Set-Up Precautions

Index

• Safety Precautions	p.4
• Operating Introduction	p.4
• Functions (Front Panel)	p.5
• Inputs & Outputs (Rear Panel)	p.8
• Set-Up	p.10
• Replacing the Crossfader	p.13
• Operating Determinations	p.13
• Technical Specifications	p.14
• Warranty & Service	p.14

Important Precautions

1.Be sure to save the packing carton in case you may ever have to return the unit for service.

2.Read all documentation before attempting to operate your new mixer. Please save all your documentation for future reference.

3.Do not spill water or other liquids in to or on to your mixer.

4.Be sure that the local power outlet matches that of the required voltage for your mixer.

5.Do not attempt to operate this unit if the power cord has been frayed or broken. Please route your power cord out of the way of foot traffic.

6.Always have the front gain controls set to their lowest level during initial power-up to prevent speaker damage.

7.Disconnect from main power before making any type of connection.

8.Do not remove the top cover under any conditions. There are no user serviceable parts inside.

9.Disconnect the unit’s main power when left unused for long periods of time.

Introduction

Introduction:

Congratulations and thank you for purchasing the American DJ® Q-MX2BPM™ mixer. This mixer is a representation of American DJ’s continuing commit- ment to produce the best and highest quality products at an affordable price.This mixer includes several inno- vative features that pack a big punch! The Q-MX2

BPM™ comes with a 2 year limited war- ranty!

Please read and understand this manual completely before attempting to operate your new mixer. This booklet contains important information concerning the proper and safe operation of your new mixer.

Unpacking:

Carefully open and unpack your mixer. Be sure to save the packaging in case you may ever need to return your unit to the factory. After unpacking, inspect the mixer for any type of damage that may have occurred during shipping or transit. If you notice any type of damage notify your dealer immediately for instructions.

Set-Up Precautions:

Please make any connections before you plug the unit in. Be sure the Power switch is in the OFF position before connecting other devices to the mixer. All fader and volume controls should be set to 0 or minimum position, before the device is switched on. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.

© American DJ Supply® - www.americandj.com - Q-MX2 BPM User Instructions page 3