American Audio Q-Spand Pro

©American Audio® - www.americanaudio.us - Q-SPAND PRO Instruction Manual Page 10

Q-SP AND P RO FRONT PANEL - CONTROLS AND FUNCTIONS CONT.

of the signal is sent to the left and right output level. For true stereo imaging, maintain the knob in the

12 o’ clock position.

11. BNC JACK - This jack is used to supply a 12V DC signal to a gooseneck light, such as the

American Audio® GNL-14.

12. POWER SWITCH - This is the main power ON/OFF button. A blue LED next to the power switch

will glow when power is ON. Before you turn the power on be sure you have made all connections to the

mixer. Also be sure you amplifiers are turned off. Remember mixer on first and turned off last.

13. WIDTH CONTROL - This knob is used to control the amount of SRS 3D process is applied to the

output source signal.

14. 3D ST CONTROL - This button is used to activate the SRS® (Sound Retrieval System®) 3D Stereo

Process. SRS retrieves the spatial information from recordings and restores the original three-dimen-

sional sound ﬁeld. As a result, the reproduced sound is much closer to a live per formance. Like live

performances, SRS has no critical listening position (sweet spot). Listeners can move around the room

and continue to be immersed in full three-dimensional sound. A microphone does not possess the

ability to interpret the direction a sound is coming from in the same way that the human ear does. How-

ever, when the audio source is recorded, directional audio cues are still present in the recording. By

breaking down the stereo signal into its various signal components, it is possible to isolate and restore

these spatial cues and place them in the proper space relative to the direct sounds, such as a soloist

or dialogue. These spatial cues are restored by the use of Head Related Transfer Functions (HRTFs),

which process ambient sounds via patented frequency response correction curves.

15. TRU BASS CONTROL - This button is used to activate the SRS® (Sound Retrieval System®) TRU

BASS™ Process. TruBass circuity actively monitors the low-frequency content of an audio signal and

optimizes the frequency and amplitude spectrum of the output signal to enhance bass perception.

Whether you are limited by space, cost or implementation, for bass previously believed impossible.

This process creates deep, rich bass in headphones and speaker systems that have poor or little bass

response. Sub-woofer performance will be enhanced substantially. Unprecedented bass response will

virtually eliminates the need for large speakers to create low frequency fundamental tones and will in

several case eliminate the need for a sub -woofer all together. Be sure that the TRU BASS™ process

will not color the midrange or create bass not present on recordings. This process will only deﬁne any

bass present on a recording.

16. TRUE BASS LEVEL - This knob is used to control the amount of "TRU BASS" process is applied

to the output source signal.

17. WOW CONTROL - This button is used to activate the SRS® WOW Process created by SRS Labs.

The WOW™ process is a combination of 3D Stereo Process and the TRU BASS™ Process. WOW cre-

ates extraordinary enhancement to the listening experience. Ordinary stereo presents a limited spatial

presentation, and often lack-luster bass (low frequency) performance. Any sound system can deliver

an audio performance with drastically improved image size, dynamics and immersion when playing a

signal processed with WOW. Because the WOW™ effect combines the 3D Stereo™ Process and the

TRU BASS™ Process, the processing of the spatial cues surrounds the listener with a holographic

representation of the performance. In addition bass becomes deep, rich and controlled through means

that don’t require a speaker with a large woofer or cabinet size. In essence you may eliminate the need

of a separate sub-woofer.

18. AUX 4 INPUT JACK - This Aux input is for the use of a Mp3 player, or XM or Sirius satellite radio.

Input volume will be controlled by the channel four fader.