©American Audio® - www.americanaudio.us - Tri Pack System - Instruction Manual Page 11

Tri Pack System Satellite Mounting

Pole Mounting – The Impact 3 satellite speakers include a pole mount
option. The pole mount socket located on the bottom of the speaker may
be used to secure the speaker to a speaker tri-pod, such as the American
Audio® SPS-1B as illustrated on the left. Always be sure to follow the
guidelines listed below when pole mounting your speaker;
Always be sure the stand is designed to support the weight of
the speaker
In outdoor situations that are prone to windy conditions and
strong wind gust, be sure to use sandbags as additional tri-pod
support, this will greatly reduce the risk of tipping
Do not stack speakers on top of each other when mounting on
a tri-pod. Only one speaker should be mounted to a tri-pod at one
time.
Always position the tri-pod legs away from foot traffic
Extend the tri-pod legs to their fully extended position to avoid
accidental tipping
Observe and follow all safety guidelines and regulations specified
by the tri-pod’s manufacturer
Be sure the tri-pod is situated on a flat, level, and stable surface
Always tighten all tri-pod locks