American Audio TTB-2010 manual User Instructions

User Instructions

Thank you for purchasing this American DJ® product. The TTB-2010 requires some assembly. Please read the following instructions before installing or using your new unit. The TTB-2010 has a 2 year limited warranty!

CAUTION! - Keep this device away from rain and moisture!

Name of Parts

1.45-rpm Adapter

2.Turntable Platter

3.Center Spindle

4.Power Switch

5.Start/Stop Button

6.Strobe Dots

7.Target Light

8.Center detent

9.Headshell

10.Speed Select Button

11.Pitch Adjustment (+/-10%)

12.Pitch Control Slider

13.Tonearm

14.Anti-skate Knob

15.Counterweight

16.Spare phono cartridge slot

17.Hinge for dust cover

18.Right RCA output jack (red)

19.Left RCA output jack (white)

20.Ground (GND)

21.Remote Start/Stop 1/4” output jack

(fig.1)

Before Use

Check for the following parts included in the package with the main unit.

•Turntable Platter • Slip mat

•Dust Cover • 45-rpm adapter

•Counterweight • Headshell

•User instructions

VERY IMPORTANT!! - Do not forget to attach rubber belt to motor for correct operation. After placing the Turntable Platter (2) onto the turntable through the Center Spindle (3), move one of the large windows on the Platter to top right corner. Attach rubber belt* around motor (see fig.1).

18 19 20 21

R L GND REMOTE

(*Rubber belt is already attached to the underside of the Turntable Platter.)

NOTES:

•Do not connect the AC power plug before assembly has been completed.

•Before turning the power on, make sure once again all the connections and power voltage settings are correct. Always turn off the power when connecting or disconnecting.

•Read this manual carefully before using the unit. Be sure to store the manual in a safe place for future reference.

	Warranty & Service
BACK PANEL	The TTB-2010 has a 2 year limited
	warranty. Mail in warranty card as
	soon as possible.

TTB-2010 User Instructions page 2	For service, contact your local
	American DJ® Dealer.