©American Audio® - www.americanaudio.com - WM-700™ Instruction Manual Page 8
WM- 700™ TROUBLE ShOOTING
Trouble Shooting: Listed below are common problems you may encounter, and their solutions.
There is no power to the unit:
1. Make sure you have connected the power cord to a 120v wall outlet.
There is little or no sound:
1. Make sure the battery is inserted properly (+/- battery terminals must match transmitter termi
nals).
2. Move transmitter closer to the receiver.
3. Is the low battery LED lit? If so replace the battery.
4. Make sure the receiver volume is not turned all the way down.
5. Check the cable connection between receiver and amplier or mixer.
There is a momentary loss of sound when the transmitter is moved around the area:
1. Move the receiver around a perform walk-through tests. If audio dropouts continue, mark the
“dead” areas and avoid the during performance.
Radio signals are interrupting performance:
1. Change the frequency channels on both the transmitter and receiver.