![](/images/new-backgrounds/1120425/12042511x1.webp)
| Fuse & Lamp Replacement |
|
|
Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® technician. Replacing with anything other than the specified part can damage the unit and will void the manufactures warranty.
Warning: If, after replacing the lamp or fuse either one continues to blow, STOP using the unit. Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage.
Fuse Replacement: Disconnect the unit’s main power supply. Insert a standard flat head screw driver in to the fuse holder housing. Turn the screwdriver in
Lamp Replacement: Caution! Never attempt to change the lamp while the fixture is plugged in. Always disconnect the main power and allow the unit ample time to cool before attempting to replace the lamp.
1.Be sure to follow the proper procedures when handling halogen bulbs.
2.Lamp replacement has been made simple by incorporating the use of a removable front cover and thumb screws.
3.Loosen the thumb screws on front cover.
4.Remove the cover.
5.Remove and replace the bulb and reassemble in reverse order.
Halogen Lamp Warning:
This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly han- dled. Never touch the lamp with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
| Gobo Wheel |
|
|
This chart details the gobo pattern as well as the gobo wheel placement.
©American DJ Supply® - www.americandj.com - | ©American DJ Supply® - www.americandj.com - |