American Dish Service ADC-66 L-R/R-L manual 268-1000

		268-1000
Conveyor Drive & Tray Track					American Dish Service
	Control, ADC-66 L-R
	Ref.		No.
	No.	Part No.	Req.		Description
	1	285-6133	1	Rocker Arm Weldment
	2	285-6134	2	Slip Clutch Bar Weldment
	3	298-3001	2	Spring, Slip Clutch
	4	284-6142	2	Spacer, Rocker Arm
	5	298-4001	2	Bushing, 1” OD x ¾” ID x 7/8” Lg
	6	284-6141	1	Block, Pillow Bushing, RH
	7	284-6139	1	Block, Base, Pillow Bushing
	8	284-6149	2	Spacer, Conveyor Connecting Bolt
	9	284-6202	1	Bar, Conveyor, ADC-66
	10	285-6136	13	Dog Weldment, Conveyor
	11	285-6137	2	Exit Dog Weldment, Conveyor
	12	285-6135	1	Idler Arm Weldment
	13	284-6140	1	Block, Pillow Bushing, LH
	14	298-4002	2	Bushing, Idler Arm, 5/8” OD x 3/8” ID x 5/8” Lg
	15	284-6143	2	Spacer, Idler Arm, 5/8” OD x 3/8” ID x 3/8” Lg
	16	291-1003	1	Motor, 1/3 HP, 3 Ph
	17	291-1004	1	Gear Box (53:1)
	18	284-6201	1	Key, Conveyor Drive Motor
	19	284-6137	1	Key, Cam Block
	20	284-6134	1	Cam Block (A), Gear Box Side
	21	098-1441	2	Set Screw, ¼-20 x ½” Lg
	22	284-6135	1	Cam Block (B), Cam Follower Side
	23	286-6189	1	Bolt, Lock, Cam Follower
	24	281-6201	1	Bearing, Cam Follower
	25	098-1611	6	Bolt, 3/8-16 x 2”, HH, SS
	26	098-2710	10	Lockwasher, 3/8”, SS
	27	098-1614	6	Bolt, 3/8” x 1”, HH, SS
	28	098-1506	2	Bolt, 5/16-18 x ¾”, HH, SS
	29	098-1802	2	Bolt, ½-13 x 1 ¼”, HH, SS
	30	098-2802	2	Lockwasher, ½”, SS
	31	098-1801	1	Bolt, ½-13 x 4”, HH, SS
	32	098-2801	1	Locknut, ½-13, SS
	33	098-1612	17	Bolt, 3/8-16 x 1 1/8” w/ ¾” Shoulder, HH, SS
	34	098-2708	17	Locknut, 3/8-16, SS
	35	285-6212	1	Dog Weldment, ADC-66
	36	098-2404	18	Washer, ¼”, SS
	37	285-6225	1	Tray Track Weldment, ADC-66, L-R, Rear
	38	285-6224	1	Tray Track Weldment, ADC-66, L-R, Front
	39	098-8009	2	Dowel Pin, 3/16” x 1” Lg, SS
	40	285-6214	1	Sequence Bar Weldment, ADC-66, L-R, Pre-Wash

13