Reset Breaker | American DJ 150

Projector 150™

Precautions

Reset Breaker:

To reset the breaker, push the breaker button in until you hear it pop back in to place. If the breaker continues to pop, stop using the unit and contact customer support the unit may require service.

•To reduce the risk of electrical shock or fi re, do not expose this unit rain or moisture

•Do not spill water or other liquids into or on to your unit

•Be sure that the local power outlet match that of the required volt- age for your unit

•Do not attempt to operate this unit if the power cord has been fray- ed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fi re in case of an internal short

•Disconnect from main power before making any type of connection

•Do not remove the cover under any conditions. There are no user serviceable parts inside

•Never plug this unit in to a dimmer pack

•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall

•Do not attempt to operate this unit, if it becomes damaged

•This unit is intended for indoor use only, use of this product out- doors voids all warranties

•During long periods of non-use, disconnect the unit’s main power

•Always mount this unit in safe and stable matter

•Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 7 for cleaning details

•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (in- cluding amplifiers) that produce heat.

•The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the unit.

C.The unit has been exposed to rain or water.

D.The appliance does not appear to operate normally or exhibits a marked change in performance.

Projector 150™

General Instructions

To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Projector 150™

Features

•Includes Built-In Hanging Yoke

•Includes Four Transparencies

•Easy Access Lamp Replacement

•Optional 35mm Adaptor

•Optional Oil Wheel Attachment

•Fully Focusing

•ZB-FCS 24v/150w, 50hrs.

Projector 150™

Warranty Registration

The Projector 150™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) num- ber. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must pro- vide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting customer support at (800) 322-6337.

Projector 150™

Halogen Lamp Precautions

Halogen Lamp Warning: This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch the lamps with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

American DJ 150 user service Reset Breaker

Models: 150

Reset Breaker: