American DJ 250

American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 30American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 29

Editing procedure 1: Using the control board only.

1. Access the main menu.

2. Tap the UP button until “EDIT” is displayed. Press ENTER.

3. The display will show “SC01”, this stands for the scene

number. For example, “SC01” is displayed, it means you will

be editing scene 1, press ENTER. You can change the scene

number by pressing the UP button.

4. Press ENTER, the display will show “C-1”, this stands for the

channel number. If “C-01” is displayed, you will be editing chan-

nel 1 of your selected scene, press ENTER. You can change the

scene number by pressing the UP button.

5. The display will show the DMX value for the channel that is

being edited. It will be displayed as “11XX”, it stands for Channel

11 of the editing scene, the DMX value is “XX”.

6. Adjust the DMX value by pressing the UP button, until you

get the expected effect for this channel.

7. Press ENTER to enter the editing of the other channels of the

scene.

8. Repeat steps 5-8, until you ﬁnish setting all the DMX values

for all the channels of this scene, each scene can have 15

channels maximum.

9. Once all the channels are completed, the display will ﬂash

“TIME”, this stands for the time needed to run this scene.

10. Press ENTER to edit the time needed, the display shows

“T-XX”, “XX” stands for the time needed to run this scene. For

example, “T-02” means scene 1 needs 6 seconds to run, “T-15”

means scene 5 needs 45 seconds to run.

11. Adjust the time needed by pressing the UP button.

12. Press ENTER to save the settings for the scene you are

editing, the display will change to the next scene automatically.

13. Repeat steps 3-12 to edit other scenes, you can edit and

save 48 scenes maximum.

14. Press MODE/ESC to exit, now you have edited and saved

scenes using the control board. The number of steps can be

deﬁned under “Step” and the scenes can be called up under

“Run”. To run the scenes see page 28.

Accu Roller 250™ Editing Program Accu Roller 250™ Editing Program