American DJ ® | Instruction Manual |
MEGA STROBE/DMX™ 750W DMX Strobe Light
CAUTION! | Read instructions before installing or plugging unit in. |
| |
SPECIFICATIONS: MODEL - Mega Strobe/DMX™ | |
Weight: | 9 lbs. |
Size: | 12" x 8.75" x 6" |
Lamp: | |
Voltage: | 120V/60Hz |
Working Position: Any Safe position | |
Fuse: | 16A |
Power Draw: 750W | |
Connection: XLR | |
Flash Rate: 15 flashes per second flash | |
Tube Life: 500,000 Flashes | |
|
|
| Thank you for purchasing the Mega Strobe/DMX! |
Here are a few tips before getting started. General Functions (REAR):
A. | POWER INPUT: AC 120V/60Hz, 16A | C | E | |
B. | CIRCUIT BREAKER: 16A | |||
|
| |||
C. | POWER INDICATOR: Lights when power is ON | B |
| |
D. | DMX DIP SWITCH SETTINGS: By assigning dip |
|
| |
| switch 10 to ON, unit goes to “DMX Pack Mode”. |
|
| |
| Follow DMX addressing printed on the rear of | A |
| |
| this Instruction Manual for desired speed and |
| D | |
| dimming settings. By assigning dip switch 10 to OFF, |
|
unit goes to “DMX
E.DMX INDICATOR: Indicates when DMX is effective.
F.DMX SIGNAL OUTPUT: XLR female socket used to connect to other Mega Strobe/DMXs.
G.DMX SIGNAL INPUT: XLR male socket used to receive DMX signals.
F
G
Operating Instructions:
1.Unit is ready to be hung or set on flat surface. We suggest the use of safety cable (not provided) when hanging unit. The Mega Strobe/DMX plugs direct into 120V. Make sure power configuration is correct.
2.Plug in power cord to turn unit ON.
3.This unit has two operation modes: “DMX
4.Switch dip switch 10 to the OFF position, the unit goes to “DMX Pack Mode”. There are 2
The strobe will flash at regular speed corresponding to the dimmer duration. Set dip switch 9 to ON, it will then
Affordable Quality Lighting Products from American DJ ® Los Angeles, CA. 90058 USA
