American DJ ® UserInstructions
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
Caution! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses.
Model: Colorwash 4™
Specifications:
Lamp: 4 x
Dimensions: 13.25” x 9.5” x 4”
Weight: 10 lbs.
Optional:
lamp also available
Thank you for purchasing this American DJ® product. For your convenience this lighting effect has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit.
Product Description:
The Colorwash 4™ features a
Operating Instructions:
Unit is ready to be hung or set on the ground. After plugging in, unit will react to the bass sounds of the music via its own internal microphone. Adjust knob on rear of unit for desired music sensitivity.
To replace lamp; Remove filter Replace bulb do not touch with bare fingers. Reassemble.
Specifications subject to change | For service, contact your American DJ® dealer. |
|
American DJ ® LOS ANGELES, CA. 90058