American DJ® User Instructions
mace™
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
Caution! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses.
Model: mace™
SPECIFICATIONS:
Lamp: 2 x
Dimensions: 21.5” x 12” x 11”
Weight: 13 lbs.
Supply Voltage: 120V
Fuse: 7A
Working Position: Any Safe position
Duty Cycle: 10 min., on, 10 min. off
Colors: Multiple Colored Lens
Optional:
Thank you for purchasing this American DJ® product. For your convenience this lighting effect has been lamped and is ready to be used, there is no assembly required . Please read the following instructions before installing or using your new unit.
Product Description:
Dual rotating colorballs on attached base
Operating Instructions:
Unit is ready to be hung or set on flat surface. Be sure not to obstruct cooling vents and keep in a well ventilated area. Fog best results, fog or spe- cial effects smoke must be used in order to see the beams of light.
Caution! Never open unit when in use. Always dis- connect main power before serving or replacing lamp. Remember always replace same lamp and fuses.
Lamp replacement: Remove thumb screws of unit and disconnect socket from rear of lamp. Remove and replace lamps..
For service, contact your American DJ® dealer.
American DJ® LOS ANGELES, CA. 90058 USA
