American DJ Saga instruction manual Power Supply, General Operation, Mode Switches

Saga™ General Instructions

To optimize the performance of this product, please read these operat- ing instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Saga™ Safety Precautions

Be sure that the local power outlet match that of the required voltage for your unit.

Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fi re in case of an internal short.

•Do not remove the unit cover under any conditions. There are no user serviceable parts inside.

Never plug this unit in to a dimmer pack

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. To reduce the risk of electrical shock or fi re, do not expose this unit rain or moisture.

This unit is intended for indoor use only, use of this product outdoors voids all warranties.

During long periods of non use, disconnect the unit’s main power. Always mount this unit in safe and stable matter.

Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the fixture.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer.

The fixture should be serviced by qualified service personnel when:

A.The power cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the appliance.

C.The appliance has been exposed to rain or water.

D.The fixture does not appear to operate normally or exhibits a marked change in performance.

Saga™ Warranty Registration

The Saga™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. num- ber must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping con- tainer. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contact- ing customer support at (800) 322-6337

Saga™ Operation

Power Supply:

Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your American DJ® Saga.™ The American DJ® Saga ™ is available in a 120v and 220v version. Because line voltage may vary from venue to venue, be sure to plug your fi xture into a wall outlet with a matching power supply before attempting to operate.

General Operation:

This fixture is designed to operate as a stand alone unit, there is no need of a controller. The Saga™ is ready to be plugged in, out of the box. If there is no lamp output check the fuse and bulb. If the fuse and bulb are good, please contact our toll free customer support number for further instructions. Please do not return the unit to your dealer without fi rst contacting customer support.

Mode Switches:

The Sage come with two mode switches on the rear of the unit. Switch 1 controls the reflector dish, switch 2 controls the gobo wheel. When the switches are in the up position (“I”) the wheels will react to sound. When the switches are in the down position (“0”) the wheels will rotate in a continuous rotation regardless of sound. Each wheel may be operated separately, so one wheel may be controlled by sound well the other may be in a rotating in continuous motion.

©American DJ Supply® - www.americandj.com - Saga™ Instruction Manual Page 3 ©American DJ Supply® - www.americandj.com - Saga™ Instruction Manual Page 4