Sonic Beam II™ Trouble Shooting

Listed below are a few common problems the user may encounter, with solutions.

No light from the unit;

1.Check if the ‘Power On’ (red) LED is lit and the fan is running. If not, there is no main supply.

2.Check the fuse in the back panel.

3.Check if lamp is lit. The user should be able to see some light escape through the fan. If power is present but the lamp is not lit, lamp may need to be replaced.

Note: The unit has been designed to shut the lamp down after 60 seconds of inactivity. This is a way of extending lamp life, be assured this is not a problem with the fixture.

Unit not responding to DMX;

1.If the Green LED on the top of the unit is flashing, the unit is definitely receiving DMX

2.Check the dip switch settings.

3.If the DMX LED is not lit, check that the DMX cables are connected properly and are wired correctly (pin 3 is ‘hot’; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected.

4.If it is a bad connection, the Green LED may flash when cables are wiggled (but remember it may also be the unit sensing audio!)

5.If DMX connectors are fairly short, ordinary microphone cables may be used. For longer runs, this may cause

Sonic Beam II™ Trouble Shooting Cont.

data transmission problems (which will show up as random or incorrect movements) for best result, use proper balanced data transmission cable.

Unit does not respond to sound;

1.Check to see if the unit is receiving DMX (the green LED should be off).

2.Tapping the microphone should cause the LED to flash (quiet or high pitched sounds will not activate the unit). If the green LED does not flash to sound there may be an internal problem.

Unit blacks out in stand alone mode;

1.Some of the units’ built-in patterns include special effects such as blackout sweeps. When connecting two units up, only one is ever blackened out at once, and the blackout ‘swaps’ between the units.

If problems are not resolved; Contact your American DJ® dealer for service.

Sonic Beam II™ Product Registration

The Sonic Beam IITM comes with a 1 year limited warranty. We recommend filling out the warranty registration card that came with your fixture to validate your warranty. You may also register your product on-line at www.americandj.com.

©American DJ Supply® - www.americandj.com - Sonic Beam II™ Instruction Manual Page 11

©American DJ Supply® - www.americandj.com - Sonic Beam II™ Instruction Manual Page 12

Page 5 Page 7
Page 6
Image 6
American DJ Sonic Beam II user service No light from the unit
Page 5 Page 7

Sonic Beam II specifications

The American DJ Sonic Beam II is a versatile and innovative lighting fixture designed to enhance any event with its stunning visual effects. This powerful LED beam light is favored by DJs, performers, and event organizers for its ability to create captivating atmospheres with minimal setup. The Sonic Beam II stands out with its bright, crisp beams that cut through smoke and haze, making it an ideal choice for clubs, concerts, and special events.

One of the key features of the Sonic Beam II is its high-output 60-watt LED source, which delivers powerful and vibrant colors. This fixture produces a sharp and focused beam of light, allowing for dynamic effects and patterns to be projected across various surfaces. The color mixing technology offers a wide range of options, with RGB color mixing capability that enables users to create a near infinite palette of colors, enhancing the overall lighting experience.

In addition to its impressive light output, the Sonic Beam II boasts a range of built-in features that cater to different needs. The fixture includes various operating modes, such as DMX control for professional setups, sound active mode for immediate activation in response to music, and automatic mode for standalone use. This flexibility makes it easy to integrate into existing lighting rigs or to use independently without the need for complex setups.

The American DJ Sonic Beam II incorporates advanced optics, resulting in crisp and well-defined beams that can be perfectly focused to create stunning effects. It also features an adjustable tilt angle, allowing users to position the fixture to suit their desired lighting design. The unit is lightweight and compact, facilitating easy transport and setup—an essential feature for mobile DJs and performers on the go.

Durability is another hallmark of the Sonic Beam II. The sturdy construction ensures that it can withstand the rigors of touring and frequent use, while the efficient heat dissipation system allows for extended operation without compromising performance.

Overall, the American DJ Sonic Beam II is an exceptional lighting fixture that combines power, versatility, and ease of use. Its advanced features make it ideal for a variety of applications, from intimate gatherings to large-scale events, ensuring that every occasion is enhanced by brilliant lighting effects. Whether you're a seasoned professional or a newcomer to the world of event lighting, the Sonic Beam II promises to elevate your lighting game to new heights.
Top Page Image Contents