American DJ Sunray-150D specifications Specifications SUNRAY-150D, Amp, Halogen Lamp Warning

American DJ ® User Instructions

SUNRAY-150D™

CAUTION! Read instructions before installing or plugging unit in.

SPECIFICATIONS: SUNRAY-150D™

Weight:	21 lbs.
Size:	10” x 10” x 14”.
Lamp:	ZB-HTI/152
Fuse:	6 AMP
Supply Voltage:	110-120V/60Hz.
Working Position:	Any Safe position.
Motor Speed:	6 rpm.
Full Intensity:	5 Minutes
Duty Cycle:	None

HALOGEN LAMP WARNING!

This fixture is fitted with halogen lamps which are highly suscepti- ble to damage if impr operly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not cov- ered under warranty conditions.

FEATURES:

The Sunray 150D™ features extremely bright focused beams of multi-colored light. This unit is Ideal for large venues as a centerpiece. The Sunray 150D™ includes a mounting bracket for mounting on ceilings. After plugging in, the unit will take five minute to warm-up to full light output . Due to the warm up time time this unit is not deigned to be turn off and on continuously, for best results and extended lamp life leave the fixture on for an extended period of time. The unit will also rotate slowly at 6 r.p.m. creating a mirror ball type effect.

Caution: Never open unit when in use. Unplug unit and let cool before servicing. Always remember to replace with the same type lamp and fuse.

For lamp replacement; Remove the screws on the upper half of the ball, remove the upper cover, replace lamp & reassemble.

For service, contact your American DJ® Dealer.

ACH UNIT IS LAMPED AND TESTED BEFORE LEAVING THE FACTORY.

Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058 USA