American DJ Tempest II/AS specifications Tempest II Instructions, Chart ONE, DMX Channel

Set ADDRESS for 201 to start at CHANNEL 202 Dipswitches # 1 = 1

4 = 8

7 = 64

8 = 128 = 201

TEMPEST II™ Instructions CONT .

The Tempest ll ™ is now Linkable with Master / Slave capability! To use this function set the MAS- TER unit dipswitch #10 on. Then connect with the XLR Cable using the Female XLR to the second unit input Male XLR , Turn all dipswitches off on the SLAVE unit. and it will respond the same as the first unit.

In addition you can select the program you want by using a DMX 512 Controller. The values needed are in Chart ONE below.The Tempest ll ™ uses 1 channel to control program selection. Please select the starting address by using the dip switches.

	CHART ONE
Value	Result
0-7	Blackout
8-15	Program 1
16-23	Program 2
24-31	Program 3
32-39	Program 4

DMX CHANNEL

2 8 32 128

ON

1 2 3 4 5 6 7 8 9 10

1 4 16 64 256

PIN CONFIGURATION

XLR MALE SOCKET

Data - 2	3 Data +
	1 Ground

DATA IN

40-47	Program 5
48-55	Program 6
56-63	Program 7
64-71	Program 8
72-79	Program 9
80-87	Program 10
88-95	Program 11
96-103	Program 12
104-111	Program 13
112-119	Program 14
120-127	Program 15
128-135	Program 16
136-143	Program 17
144-151	Program 18
152-159	Program 19
160-167	Program 20
168-175	Program 21
176-183	Program 22
184-191	Program 23
192-199	Program 24
200-207	Program 25
208-215	Program 26
216-223	Program 27
224-231	Program 28
232-255	Random
	Programs

Each # above has an ADDRESS based on binary code. #1 ADDRESS is 1

#2	“	“	2
#3	“	“	4
#4	“	“	8
#5	“	“	16
#6	“	“	32
#7	“	“	64
#8	“	“	128
#9	“	“	256
#10	is not used with DMX but to select Master / Slave

ALWAYS SET THE ADDRESS ONE LESS THAN THE CHANNEL WANTED.

You set the ADDRESS wanted by COMBINING the Dipswitches.

EXAMPLE:

Set ADDRESS at 0 to start at CHANNEL 1 ( all Dipswitches OFF)

Set ADDRESS for 21 to start at CHANNEL 22 Dipswitches # 1 =1

3 = 4

5 = 16 = 21

American DJ® LOS ANGELES, CA. 90058