American DJ ® User Instructions
VERTI-Pro™ 
CAUTION! | Built in programs |
|
|
| ||
Master slave |
|
|
| |||
Read instructions before |
|
|
| |||
capabilities |
|
|
| |||
installing or plugging |
|
|
|
| ||
unit in. |
|
|
|
| ||
|
|
|
| |||
|
|
|
|
|
| |
SPECIFICATIONS: MODEL |
|
|
| |||
|
|
| HALOGEN LAMP WARNING! | |||
Weight: | 8 lbs. |
| This fixture is fitted with halogen | |||
Size: | 14"H x 12"W | |||||
lamps which are highly susceptible | ||||||
Lamp: | 120V 300W | |||||
to damage if improperly handled. | ||||||
Fuse: | 7A |
| Never touch lamp with bare fingers | |||
Supply | Voltage: | 120V | as the oil from your hands will | |||
Working Position: Any Safe position | shorten lamp life. Also, never move | |||||
fixture until lamp has had ample | ||||||
Duty Cycle: 10 min. ON, 10 min. OFF | ||||||
time to cool. Remember, lamps are | ||||||
Colors: | Multiple Colored | |||||
not covered under warranty | ||||||
Optional: | conditions. | |||||
also available |
|
|
|
| ||
|
|
|
|
|
| |
OPERATING INSTRUCTIONS: 
Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via its internal microphone, and not lightly tapping on the case. Adjust the sensitivity knob on the unit to music sensitivity. Unit will Master/ Slave by setting dip switch on back of unit and connecting via XLR Cables. All Dip switches off is Master, #1 on is for Slave. These settings must be done before plugging in to power because dip switch settings can not change once unit is on. If no sound is detected by unit for 3 seconds lights will turn off. Be sure sensitivity is up, do not to obstruct cooling vents and keep in a well ventilated area. For best results, fog or special effects smoke must be used in order to see the beams of light.
The 1/4” phone plug on the control is not for audio input, it is for a blackout control, if you connect audio into this it will burnout the circuit board.
CAUTION: Front part of fixture will get extremely hot if operated for long periods. For optimum performance, use a 10 min ON 10 min OFF duty cycle. Let unit cool before handling or replacement. Caution! Never open unit when in use. Always dis- connect main power before serving or replacing lamp. Remember always replace same lamp and fuses.
Lamp replacement: Remove top cover of unit. Remove and replace lamps with the same wattage and voltage.
For service contact your American DJ Dealer.
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058 USA
