H. TUMBLER AND BEARING ASSEMBLY

(Remove back guard to access assembly)

TO REPLACE TUMBLER PULLEY (NON-REVERSING)

1. Loosen V-belts, then rotate pulley and roll V-belts out of the grooves.

2. Loosen two (2) setscrews on the pulley and pull the pulley off the shaft.

3. Reverse procedure for installing the new tumbler pulley.

NOTE: Check belt alignment before operating the dryer.

TO REPLACE TUMBLER PULLEY (REVERSING)

1. Loosen V-belts, then rotate pulley and roll V-belts out of the grooves.

2. Remove cap screws securing taper lock hub to pulley.

3. Insert cap screws in tapped removal holes and tighten evenly until bushing becomes loose in pulley. See figure “A”.

4. Remove bushing, pulley, and key.

5. Assemble bushing and pulley as shown in figure “B”. When cap screws are loosely inserted, bushing remains fully expanded to provide a sliding fit to the shaft.

6. Insert key on the shaft, then slide pulley to desired position with cap screw heads to the outside.

7. Tighten cap screws progressively. There remains a gap between the pulley hub and the flange of the bushing.

IMPORTANT: Tighten screws evenly and progressively. Never allow the pulley to be in contact with the flange of the bearing. This gap should measure from 1/8” to 1/4”. Proper cap screw torque is 30 ft-lb (40.67 Nm), if greater tightening forces are applied, excess pressure will be created in the hub of the mounted pulley, which may cause it to crack.

34

American Dryer Corp.

450268-1

Page 34
Image 34
American Dryer Corp AD-30, AD-25 service manual Tumbler and Bearing Assembly, To Replace Tumbler Pulley NON-REVERSING

AD-25, AD-30 specifications

American Dryer Corporation (ADC) has long been a trusted name in the commercial laundry equipment industry. Among their notable offerings are the AD-30 and AD-25 dryers, which are engineered to provide exceptional performance, reliability, and efficiency.

The AD-30 dryer is designed for high-capacity laundry operations, making it an ideal choice for large businesses such as hotels, hospitals, and laundromats. With a maximum drying capacity of 30 pounds, the AD-30 features a robust construction that can withstand the demands of heavy usage. Its powerful airflow technology ensures quick drying times, improving productivity and minimizing energy consumption. The dryer is equipped with a microprocessor control that offers multiple cycle options and customizable settings, allowing operators to tailor each drying cycle based on the specific fabric types being processed.

On the other hand, the AD-25 serves smaller operations with a capacity of 25 pounds, making it an efficient choice for businesses with moderate laundry needs. Similar to the AD-30, it incorporates advanced airflow technology to enhance drying efficiency. The AD-25 also features easy-to-use controls and programmable settings, providing flexibility for various drying requirements. Both models come with an easy-to-clean lint filter that helps maintain optimal air quality and prolongs the life of the machine.

In terms of construction, both dryers are built with durability in mind. Their stainless steel exteriors are not only aesthetically pleasing but also resistant to corrosion, ensuring they remain in good condition over time. The design of these dryers incorporates vibration reduction systems to minimize noise during operation, contributing to a more pleasant working environment.

Energy efficiency is a hallmark of American Dryer Corp products, and both the AD-30 and AD-25 are no exception. They are designed to consume minimal energy while delivering maximum drying performance, which can lead to significant cost savings over time. Additionally, the dryers are engineered with safety features, including over-temperature protection and a non-reversible door to prevent accidents.

In summary, American Dryer Corp's AD-30 and AD-25 dryers exemplify the brands' commitment to providing quality, efficiency, and reliability in commercial laundry operations. With their advanced technologies and user-friendly features, these dryers are well-equipped to meet the diverse needs of the laundry industry.