American Dryer Corp AD-30V manual AD-50V CE Burner Assembly

AD-50V CE Burner Assembly

Illus. No.	Part No.	Qty.	Description
1	884265	1	Ignitor Flame-Probe ONLY
2	887145	1	CE Direct Spark Ignition Module
			(for models mfd. as of June 10, 2004)
	887209	1	CE Direct Spark Ignition Module
			(for models mfd. prior to June 10, 2004)
3	810029	1	Direct Spark Ignition Module Mounting Bracket Assembly
4	150309	6	#10-16 x 1/2” Hex Head TEK Crimptite Screw
5	141105	3	Large Tube Burner
6	150108	3	#8-32 x 1/2” Pan Head Machine Screw
7	152013	2	#6-32 Hex Nut
8	151001	3	#8-32 Pal Nut
9	140819*	3	#30 Burner Orifice (natural gas)
	140804*	3	#48 Burner Orifice (liquid propane gas)
10	141232	1	1/2” Manifold (3-port)
11	318700	3	Pipe Bracket (bent)
12	150300	9	#10-16 x 1/2” Hex Washer TEK Screw
13	128933	1	CE Gas Valve (natural gas)
	883255	1	CE Gas Valve (liquid propane gas)
14	141317	1	1/2” Bronze Union Elbow
15	142809	1	1/2” x 29-1/8” Pipe
16	850899	1	Burner Box ONLY
	817174**	1	Natural Gas Burner Assembly Complete
			(includes illus. nos. 1 through 8, 10 through 28, and 30)
	817207**	1	Liquid Propane Gas Burner Assembly Complete
			(includes illus. nos. 1 through 8, 10 through 28, and 30)
	––––––****	1	Liquid Propane Conversion Kit
	883310***	1	Steam to Gas Interface Plate … Not Illustrated
17	142935	1	1/2” Coupling
18	319704	1	Hi-Limit Mounting Bracket
19	150001	2	#6-32 x 1/2” Round Head Machine Screw
20	151000	2	#6-32 Pal Nut
21	154004	1	Twin Speed Nut
22	130201	1	330° Hi-Limit Thermostat
23	802799	1	Sail Switch Top and Switch Bracket
24	150303	2	#4 x 3/4” Pan Head Machine Screw
25	122200	1	SPST Sail Switch (for micro models Only)
	122404	1	SPDT Sail Switch (for dual timer models Only)
26	105500	1	Sail Switch Actuator Rod
27	319202	1	Sail Switch Damper (flat)
28	154002	1	1/8” Push-On Fastener
29	830354	1	Direct Spark Ignition Control Wiring Harness
30	884279	1	High Voltage Gray Carbon Wire with Terminal
			(for models mfd. as of March 1, 2004)
	128919	1	High Voltage Red Wire
			(for models mfd. prior to March 1, 2004)

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

***Needed when converting from steam heat to gas heat.

****Contact ADC factory with serial number of dryer and country destination.

450438 - 5 www.amdry.com 45