D. FRESH AIR SUPPLY REQUIREMENTS

When the dryer is operating, it draws in room air, heats it, passes this air through the basket (tumbler), and exhausts it out of the building. Therefore, the room air must be continually replenished from the outdoors. If the make-up air is inadequate, drying time and drying efficiency will be adversely affected. Ignition problems and sail switch “fluttering” problems may result, as well as premature motor failure from overheating. The dryer must be installed with provisions for adequate combustion and make-up air supply.

Air supply (make-up air) must be given careful consideration to ensure proper performance of each dryer. An unrestricted source of air is necessary for each dryer. As a general rule, an unrestricted air entrance from the outdoors (atmosphere) of a minimum of 4 square feet (0.37 square meters) is required for each gas dryer and a minimum of 4.75 square feet (0.44 square meters) for each steam dryer.

To compensate for the use of registers or louvers used over the openings, this make-up air must be increased by approximately thirty-three percent (33%). Make-up air openings should not be located in an area directly near where exhaust vents exit the building.

It is not necessary to have a separate make-up air opening for each dryer. Common make-up air openings are acceptable. However, they must be set up in such a manner that the make-up air is distributed equally to ALL the dryers.

EXAMPLE: For a bank of six (6) dryers, two (2) unrestricted openings measuring 3 feet by 4 feet (0.91 meters by 1.22 meters) are acceptable.

Allowances must be made for remote or constricting passageways or where dryers are located at excessive altitudes or predominantly low pressure areas.

IMPORTANT: Make-up air must be provided from a source free of dry cleaning solvent fumes. Make-up air that is contaminated by dry cleaning solvent fumes will result in irreparable damage to the motors and other dryer components.

NOTE: Component failure due to dry cleaning solvent fumes will VOID THE WARRANTY.

10

American Dryer Corp.

113406-1

Page 13 Page 15
Page 14
Image 14
American Dryer Corp ML-175DR installation manual Fresh AIR Supply Requirements
Page 13 Page 15

ML-175DR specifications

American Dryer Corp ML-175DR is a high-efficiency, state-of-the-art hand dryer designed to provide a superior drying experience in public restrooms and commercial environments. With its sleek and modern design, the ML-175DR not only enhances the aesthetic appeal of any facility but also offers numerous practical benefits.

One of the standout features of the ML-175DR is its powerful motor, which generates a strong airflow of up to 17,000 RPM. This ensures that hands are dried quickly and effectively, taking only about 10 to 15 seconds to achieve optimal dryness. This efficiency significantly reduces waiting time for users, making it a convenient choice for high-traffic areas.

The ML-175DR incorporates advanced sensor technology that allows for touchless operation. The built-in infrared sensors detect the presence of hands beneath the nozzle, automatically activating the drying process. This feature not only promotes hygiene by minimizing contact with surfaces but also helps conserve energy, as the dryer only operates when needed.

Another noteworthy characteristic of the ML-175DR is its eco-friendly design. It is constructed with energy-efficient components that use significantly less power compared to traditional hand dryers. This not only reduces electricity costs but also supports sustainability efforts by minimizing the carbon footprint associated with restroom facilities.

Moreover, the ML-175DR includes an adjustable airspeed feature, allowing users to customize their drying experience according to different environments. Whether it’s a busy restaurant or a quiet office, the adjustable settings enable optimal performance tailored to the specific needs of each location.

In terms of durability, the ML-175DR is built with heavy-duty materials that ensure longevity, making it a reliable choice for various commercial and public settings. Its robust construction is resistant to wear and tear, which is essential for hand dryers that see frequent use.

In summary, the American Dryer Corp ML-175DR stands out for its powerful yet efficient drying capabilities, touchless operation, eco-friendly design, adjustable airspeed, and durable construction. These features make it an excellent choice for modern facilities looking to enhance hygiene, improve user experience, and promote sustainability.
Top Page Image Contents