A
Corner Mount | Securing Screws |
|
Securing
Screws
Securing Hole
Locate the corner mount in the required position. Use screws and wall plugs (as appropriate to the wall surfaces) to fix the corner mount on the wall. Access to the screw positions is gained through the open front aperture of the corner mount.
Note: The securing hole should be on the bottom side of the corner mount (as picture shown above).
B
Power Input
Connector
Cable Entry
Video Connector
Dome Camera
Install the dome camera on the corner mount by first arranging the cables.
ADCPWMCRNR
Indoor Mini Dome
Corner Mount Installation Sheet
C
Fit and tighten the dome camera on the coner mount by rotating clockwise.
D
Corner Mount Lid
| E |
Securing Screw |
|
Screw Cover | Installation Completed. |
Cover the dome camera with the corner mount lid. Insert and tighten the securing screw to fix the lid to the corner mount. Insert the white screw cover to complete the installation.
Note: The lid is designed so that when placed on the base it has some free movement to try and compensate for
The ADCPWMCRNR Corner Mount is designed for use with all Discover Indoor
Packing List
• Corner Mount x 1
• Corner Mount Lid x 1
• Screw Pack x 1
Please visit our website for more information: www.americandynamics.net
© 2007 Sensormatic Electronics Corporation.
Product specifications subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.