RHIUTH
op Hat Housing with
Trim Ring
RHIUIB
I-Beam Clamp
RHIUHC
Hard Ceiling Bracket
RHIUFB
Fixed Bracket
RHIUAB
Adjustable Bracket
RHIU2X2M
2’ x 2’ Tile Mount
RHIU2X2P
2’ x 2’ Tile Pendant
Mount
RH2X2
2’ x 2’ Tile Mount Plate
T
RHIUIBM
I-Beam Mount Assembly
This Top Hat housing with trim ring and plastic base
mounts directly to a ceiling or to an indoor mounting
structure. It is a metal enclosure that houses the dome.
The trim ring is slightly larger so that it completely covers
the Top Hat’s metal rim. The RHIUTH is plenum rated.
This bracket enables the Top Hat housing to be recessed
in the ceiling (requires RHIUTH Top Hat). The bracket is
mounted to the Top Hat and installed in a hole cut in the
ceiling - perfect for sheet rock, plaster or solid ceilings.
The hard ceiling bracket can be installed entirely from
below the ceiling; the installer will not have to access the
area above the ceiling to install it.
This bracket enables the Top Hat housing to be recessed
in the ceiling or in a 2-foot drop ceiling tile (requires
RHIUTH Top Hat). The bracket is mounted to the Top
Hat housing and installed in a hole cut in the ceiling. The
bracket distributes the weight of the dome and Top Hat
housing across the T-bar framework of the ceiling. It is
also very useful for sheet rock, plaster, or solid ceilings.
This bracket enables the Top Hat housing to be recessed
in drop ceiling that utilize other than 2-foot grids
(requires RHIUTH Top Hat). The bracket distributes the
weight of the dome and the Top Hat housing across the
T-bar framework of the ceiling, and is adjustable from
632-1219 mm (24-48 in).
This mount enables the Top Hat housing to be recessed
in a 2’ x 2’ drop tile ceiling. The ceiling tile is removed and
the white tile mount is simply dropped in its place. A Top
Hat housing and plastic base are included in the kit.
This mount enables the pendant mount to be installed in
a 2’ x 2’ drop tile ceiling. The Top Hat housing/dome
assembly also mounts to the structure. The mounting kit
includes a 2x2 plate and pendant hardware. The plate
attaches to a 1.25” pipe, provided by the customer, then
affixes to the Top Hat housing/dome assembly. If
mounting a SpeedDome Optima with this model, a
RHOPN ceiling pendant mount kit is required.
This mount enables the dome to be recessed in a 2’ x 2’
drop tile ceiling. The ceiling tile is removed and the tile
mount is simply dropped in its place.
This assembly enables the dome to suspend from an
I-beam; it includes the clamp, pipe tee, nipple, and flange.
The clamp attaches to a 1.25” pipe, provided by the
customer, then affixes to the pendant hardware. The Top
Hat housing/dome assembly also mounts to the
structure.
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
SpeedDome Ultra Series
SpeedDome Optima
157 x 175 x 175 mm
(6 x 7 x 7 in)
6.7 x 293 x 127 mm
(.29 x 12 x 5 in)
212 x 179 x 56 mm
(8 x 7 x 2 in)
180 x 632 x 100 mm
(7 x 24 x 4 in)
180 x 1219 x 100 mm
(7 x 48 x 4 in)
190 x 607 x 607 mm
(7 x 24 x 24 in)
47 x 605 x 605 mm
(2 x 23 x 23 in)
47 x 605 x 605 mm
(2 x 23 x 23 in)
6 m (max.) x 293 x
127 mm
(20 ft (max.) x 12 x
5 in)
Galvanized steel
Steel
Galvanized steel
Galvanized steel
Galvanized steel
Aluminum, cold
rolled steel, ABS
plastic
Aluminum, cold
rolled steel, ABS
plastic
Painted
aluminum
Steel and
galvanized
steel
2.9 kg
(6.4 lbs)
This clamp enables the dome to suspend from an I-beam.
The I-beam clamp is installed in combination with the
RHOPN Ceiling Pendant Mount to affix the Top Hat
housing/dome assembly in I-beam installations. This
clamp is also included with each RHIUIBM.
.77 kg
(1.7 lbs)
1.5 kg
(3.3 lbs)
.70 kg
(1.6 lbs)
1.8 kg
(4.0 lbs)
2.3 kg
(5.0 lbs)
2.7 kg
(6.0 lbs)
5.4 kg
(12.0 lbs)
1.7 kg
(3.8 lbs)
Product Description *Dome Weight Dimensions Construction Safety
Compatibility (HxWxD)
This mount allows an outdoor dome housing to be
suspended from an outdoor ceiling or horizontal surface.
It can be installed using either 1.25'' NPT threaded pipe or
rigid conduit, either new or existing, up to 3 meters
(10 feet) in length.
SpeedDome Ultra Series
SpeedDome Optima
1.8 kg
(4.0 lbs)
115 x 120 x 120 mm
(4.5 x 5 x 5 in)
Powder coated
aluminum and
ABS plastic
RHOPN
Indoor
Pendant
Mount
Indoor Mounting Options