4-2 ADTTE Matrix Keyboard Operator's Manual
Arming / Disarming Monitors Note: This function can only be performed with the keyboard lock disabled. To
disable the keyboard lock, refer to Chapter 2 “Getting Started.”
When a monitor is armed, the camera video associated with an alarm for that monitor
appears when an alarm has been triggered.
To arm a monitor:
1. Enter the monitor number and press (Monitor button).
2. Enter the display/clearance type, and press Mon Arm On.
Once a monitor is armed for alarm display, the Run, Hold, Next, and Last buttons are used
to control the Alarm Tour. The following table explains how to control the Alarm Tour.
Button Description
Run Starts the tour of alarm inputs currently in an abnormal state.
Hold Pauses the Alarm Tour.
Next Steps forwards through an Alarm Tour that is on hold
Last Steps backwards through an Alarm Tour that is on hold.
When a monitor is disarmed, the alarm video does not display on the selected monitor.
To disarm a monitor:
1. Enter the monitor number and press (Monitor button).
2. Enter the display/clearance type, then press the Mon Arm Off button.
For more information about arming/disarming monitors or Alarm Tours, refer to the matrix
switcher operating instructions.