American Power Conversion 1500 VA user manual User Configurable Items

4:USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE ADJUSTED THROUGH POWERCHUTE SOFTWARE

FUNCTION		FACTORY		USER SELECTABLE	DESCRIPTION
		DEFAULT		CHOICES
Self-Test	Every 14 days			Every 7 days	Set the interval at which the UPS will
		(336 hours)		(168 hours),	execute a self-test.
				Every 14 days
				(336 hours),
				On Startup Only,
				No Self-Test
UPS ID		UPS_IDEN	Up to eight charac-		Uniquely identify the UPS, (i.e. server
				ters (alphanumeric)	name or location) for network man-
					agement purposes.
Date of Last		Manufacture Date		mm/dd/yy	Reset this date when you replace the
Battery					battery module.
Replacement
Minimum Capacity		0 percent		0, 15, 50, 90 percent	Specify the percentage to which batter-
Before Return from					ies will be charged following a low-
Shutdown					battery shutdown before powering
					connected equipment.
Voltage Sensitivity		High		High sensitivity,	Note: In situations of poor power qual-
The UPS detects				Medium sensitivity,	ity, the UPS may frequently transfer to
				Low sensitivity	battery operation. If the connected
and reacts to line
					equipment can operate normally under
voltage distortions
					such conditions, reduce the sensitivity
by transferring to
					setting to conserve battery capacity
battery operation to
					and service life.
protect connected
equipment.
Alarm Delay After		5 seconds	5 second delay,		Set the delay to avoid alarms for minor
Line Fail				30 second delay,	power glitches.
				At low battery
				condition,
				No alarm
Shutdown Delay		60 seconds	60, 180, 300, 600		Set the interval between the time when
				seconds	the UPS receives a shutdown com-
					mand and the actual shutdown.

7