Copyright 2002 APC Japan | American Power Conversion 480kW instruction

APC Silcon

480kW 400/415V UPS User Guide

Copyright ©2002 APC Japan

Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor

Image 1

American Power Conversion manual 480kW 400/415V UPS User Guide, Copyright 2002 APC Japan

Contents

Copyright 2002 APC Japan 480kW 400/415V UPS User Guide Thank You User Guide APC Silcon 480kW 400/415V UPS Contents Introduction IntroductionDisplay Unit Stop UPS for stand-by Stop/Start UPS and Operating the External Service BypassStart UPS from stand-by Switching off the UPS Stop UPS for complete power down System OFF UPS start-up Start UPS from complete power down System start-up now completed Bypassing the Single System UPS Operating the External Service Bypass Switch single systems Stop/Start UPS and Operating the External Service Bypass System OFF Normal operation Load power 0% Bypass operation Bypassing the Parallel UPS System All UPSs Press On the keyboard until Stop/Start UPS and Operating the External Service Bypass Set input switches Q001 to position Isolating one UPS in a Parallel/Redundant System Stop/Start UPS and Operating the External Service Bypass Operation OperationKeyboard Display of Measured Values Using the Remote Display Economy Mode Parameter Settings Parameter SettingsParameter Settings Programming Keys Switching to Bypass OperationProgramming Example Normal operation Alarms and Events Alarms and EventsDisplaying the Alarm Stack Mode Comments Alarms Description Action Possible Alarms Alarms and Events Parallel Operation Alarms Rectifying Alarm MessagesCorrection of false alarm situations during service Maintenance & Testing Maintenance & TestingBattery Monitoring Test Battery Capacity Test Until Battery capacity Test Xxx Press Data stored Warranty WarrantyAPC Silcon UPS Limited Factory Warranty How to Contact APC How to Contact APCAPC Corporate APC Denmark