Contents
Main
Page
Introduction
1.1 Display Unit
1.0 Introduction
User Guide APC Silcon 480kW 400V UPS 3
4 User Guide APC Silcon 480kW 400V UPS
2.1 Stop UPS (for stand-by)
2.0 Stop/Start UPS and Operating the External Service Bypass Panel
2.2 Start UPS (from stand-by)
2.3 Stop UPS (for complete power down)
Page
2.4 Start UPS (from complete power down)
8 User Guide APC Silcon 480kW 400V UPS
2.5 Operating the External Service Bypass Switch (single systems)
Page
If battery has been disconnected, please refer to section 2.4.1 UPS start-up.
2.6 Operating the External Service Bypass Switch (parallel systems)
Page
Page
Page
2.7 Isolating one UPS in a Parallel Configuration for Service/Maintenance
Page
18 User Guide APC Silcon 480kW 400V UPS
3.1 Keyboard
3.0 Operation
3.2 Display of Measured Values
Time cannot be displayed from the Remote Display.
3.3 Using the Remote Display
3.4 Economy Mode
User Guide APC Silcon 480kW 400V UPS 21
4.0 Parameter Settings
4.1 Programming Keys
4.2 Switching to Bypass Operation
Page
24 User Guide APC Silcon 480kW 400V UPS
5.0 Alarms and Events
5.1 Displaying the Alarm Stack
5.2 Displaying the Event Stack
5.3 Possible Alarms
Page
5.4 Rectifying Alarm Messages
5.5 Parallel Operation Alarms
28 User Guide APC Silcon 480kW 400V UPS
Maintenance & Testing
6.0 Maintenance & Testing
6.1 Fan
6.2 Battery Monitoring Test
6.3 Battery Capacity Test
Maintenance & Testing
30 User Guide APC Silcon 480kW 400V UPS
Warranty
7.0 Warranty
7.1 APC Silcon UPS Limited Factory Warranty
How to Contact APC
User Guide APC Silcon 480kW 400V UPS 31
8.0 How to Contact APC
APC Corporate
APC Denmark
