American Power Conversion 100VAC, 750VA Mounting the UPS in a Rack

Mounting the UPS in a Rack

The UPS is heavy. To lighten it, you may remove the battery before mounting the unit in the rack

(Steps 1 and 2).

Install the UPS at or near the bottom of the rack.

Check to make sure the rack will not tip after installing the UPS into the rack.

Step B

Step

Step 1 Step 2 Be careful-the battery is heavy.

Step 3 Step 4

Step 5

Contents

Main Page Introduction 1: I Unpacking Positioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Installing and Connecting the Battery and Attaching the Front Bezel Connecting Equipment and Power to the UPS Page 2: OPERATION On Battery Operation 3: USER CONFIGURABLE ITEMS Page 4: STORAGE, MAINTENANCE, AND TRANSPORTING Storage Replacing the Battery Module Disconnecting the Battery for Transport 5: TROUBLESHOOTING Page Page Service Contacting APC 6: REGULATORY AND WARRANTY INFORMATION Regulatory Agency Approvals and Radio Frequency Warnings Declaration of Conformity Limited Warranty