Introduction – UPS Family Range and Components
10 AIS® 3000 10-40kVA, 400V, Site Preparation and Installation Manual – 990-2258
User interface
Display: user-control interface used to configure the functionality, monitor the system, set alarm
thresholds, and to provide audible and visual alarms.
Network Management Card with Environmental Monitor (AP9619): used for remote system
control and monitoring, e-mail notifications etc. See separate manual for the AP9619.
Computer-interface port for the connection of computers with APC Powerchute® software.
Mechanical Bypass Lever: used to bypass the upstream mains power around the UPS to support
the load directly = internal mechanical bypass operation.
Service port (for APC maintenance personnel only) .
Display port for the connection of display communication cable.
Documentation storage.
10/100Base-T
Probe
AP9619 Network Management Card EM
!
Reset
OutputPwr Zone
10/100
Model:
Serial:
BATTERY UNIT
Model:
Serial:
BATTERY UNIT
Model:
Serial:
BATTERY UNIT
Model:
Serial:
BATTERY UNIT