2
Drill a clearance hole inside the perimeter line of the template.
Cut opening around the perimeter of the template.
Perimeter of template
Perimeter of template
5
After checking fit and alignment, turn lavatory upside down and apply a generous portion of sealant around the underside of the rim near the edge. Carefully lower lavatory in place, align with marks made earlier, and press down firmly. Allow sealant to set before connecting supplies and drain.
3
Mount the faucet and drain |
| |
assembly (not included) on |
| |
the lavatory following faucet |
| |
manufacturer's instructions. |
| |
Be certain to apply a bead of | A | |
sealing putty on the underside | ||
| ||
of the drain (Part "A") in order |
| |
to ensure a watertight seal |
| |
between the lavatory and |
| |
drain. Remove excess putty |
|
6
Connect supply line to faucet (finger tight) and carefully bend tubes to engage with the supply
after installing drain on |
lavatory. |
4 Before applying the sealant, place the lavatory temporar- ily into the
7
Connect trap to drain |
|
assembly hand tight to |
|
check alignment. It may |
|
be necessary to cut off | C |
part of the tailpiece | B |
(area "B") or part of |
|
the horizontal leg of the |
|
trap (area "C"). Secure |
|
joints for watertight |
|
assembly. |
|