American Standard 0475.020 dimensions Aqualyn Countertop Sink, Nominal Dimensions, Bowl sizes

BARRIER FREE

AQUALYN™ COUNTERTOP SINK

VITREOUS CHINA

AQUALYN™ COUNTERTOP SINK

•Made from vitreous china

•Self-rimming with cutout template supplied

•Front overflow

•Faucet ledge

Shown with 4801.862 Amarilis/Heritage faucet with Triune cross handles (not included)

❏0475.020 Faucet holes on 8" (203mm) centers (illustrated)

❏0475.920 Faucet holes on 8" (203mm) centers

•Less overflow

❏0476.028 Faucet holes on 4" (102mm) centers

❏0476.037 Faucet holes on 4" (102mm) centers

•Extra right-hand hole

❏0475.035 Faucet holes on 4" (102mm) centers

•Extra left-hand hole

❏0476.928 Faucet holes on 4" (102mm) centers

•Less overflow

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

❏ 0475.047 Center hole only						610mm
					51mm	(24)
				OPTIONAL
		203mm			(2)
Nominal Dimensions:		(8)
				71mm
518 x 441mm				(2-13/16)
				(6-7/8)
		FINISHED		175mm
(20-3/8" x 17-3/8")		WALL
		SPLASH BACK
		OR
Bowl sizes:				(17-3/8)		203mm	DIMENSIONAL
						(8)
				441mm			DRAWING FOR
406mm (16") wide			C/L			MIN.	PURPOSES ONLY.
						IT IS NOT AN EXACT
254mm (10") front to back				(33-5/8)		REPRESENTATION.
				854mm
143mm (5-5/8") deep					686mm
			518mm		(27)
Compliance Certifications -			(20-3/8)		MIN.		152mm
Meets or Exceeds the		COUNTERTOP (BY OTHERS)		SEALING COMPOUND			(6)
							MAX.
				(3/8)
				10mm
Following Specifications:						BARRIER FREE
• ASME A112.19.2M for						CLEARANCE	229mm
		*279mm					(9)
Vitreous China Fixtures				178mm			MIN.
		(11)		(7)
		*324mm
		(12-3/4)
		SUPPLIES	203mm
To Be Specified:		AS REQ'D.	(8)	178mm
❏ Color: ❏ White	❏ Bone			(7)
❏ Linen	❏ Silver	1-1/4 O.D.
❏ Fawn Beige ❏ Black				787mm (31)
		WASTE
				854mm (33-5/8)
❏ Faucet*:		TAILPIECE
		1-1/4 O.D.		FINISHED
❏ Faucet Finish:				FLOOR

❏ Supplies:
❏ 1-1/4" Trap:		NOTES:
		* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
* See faucet section for additional models available		SUGGESTED.
		FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
		TEMPLATE SUPPLIED WITH SINK.
	MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES	FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
	AND ANSI A117.1 ACCESSIBLE AND USABLE	SEPARATELY.
		SEALING COMPOUND SUPPLIED BY OTHERS.
	BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor. Lavatory installed 51mm (2") minimum from front edge of countertop provides 686mm (27") knee clearance area.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	J43
© 2008 AS America Inc.		Revised 2/08