American Standard 0490.027 dimensions Rondalyn Countertop Sink, Nominal Dimensions, Bowl sizes

BARRIER FREE

RONDALYN™ COUNTERTOP SINK

VITREOUS CHINA

RONDALYN™ COUNTERTOP SINK

•Made from vitreous china

•Self-rimming with cutout template supplied

•Front overflow

•Faucet ledge

Shown with 4801.862 Amarilis/Heritage faucet with Triune cross handles (not included)

❏ 0490.011 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0491.019 Faucet holes on 4" (102mm) centers
❏ 0491.027 Faucet holes on 4" (102mm) centers
• Extra right-hand hole
❏ 0491.035 Faucet holes on 4" (102mm) centers
• Extra left-hand hole
❏ 0490.156 Center hole only							610mm
						102mm	(24)
Nominal Dimensions:				203mm	OPTIONAL
						(4)
				(8)
486mm (19-1/8") Round					83mm
					(3-1/4)
			FINISHED		184mm
					(7-1/4)
Bowl sizes:			WALL
			OR
381mm (15") wide			SPLASH BACK
						203mm
308mm (12-1/8") front to back
						(8)		DRAWING FOR
146mm (5-3/4") deep				C/L		MIN.		DIMENSIONAL
								IT IS NOT AN EXACT
								PURPOSES ONLY.
					851mm			REPRESENTATION.
					(33-1/2)
Compliance Certifications -						686mm
Meets or Exceeds the
						(27)
Following Specifications:				(19-1/8)		MIN.		(6)
				486mm				152mm
• ASME A112.19.2M for			COUNTERTOP (BY OTHERS)					MAX.
			SEALING		11mm
Vitreous China Fixtures			COMPOUND				BARRIER FREE
					(7/16)
							CLEARANCE	229mm
								(9)
			*273mm					MIN.
					187mm
			(10-3/4)		(7-3/8)
			*318mm
			(12-1/2)
					178mm
			SUPPLIES	203mm	(7)
				(8)
			AS REQ'D.
To Be Specified:	❏ Bone				787mm (31)
❏ Color: ❏ White					FINISHED
			1-1/4 O.D.		851mm (33-1/2)
❏ Linen	❏ Silver		WASTE		FLOOR
			1-1/4 O.D.
❏ Fawn Beige		❏ Black	TAILPIECE

❏Faucet*:

❏ Faucet Finish:	SEE REVERSE FOR ADDITIONAL ROUGHING-IN
❏ Supplies:	DIMENSIONS

❏1-1/4" Trap:

		NOTES:
* See faucet section for additional models available		* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
		SUGGESTED.
		FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
		TEMPLATE SUPPLIED WITH SINK.
	MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES	FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
		SEPARATELY.
	AND ANSI A117.1 ACCESSIBLE AND USABLE	SEALING COMPOUND SUPPLIED BY OTHERS.
	BUILDINGS AND FACILITIES - CHECK LOCAL CODES.	IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
	Install lavatory 864mm (34") from finished floor.
	Lavatory installed 51mm (2") minimum from front edge	of tolerances established by ANSI Standard A112.19.2.
		These measurements are subject to change or cancellation. No responsibility is
	of countertop provides 686mm (27") knee clearance area.	assumed for use of superseded or voided pages.
		J45
© 2008 AS America Inc.			Revised 2/08