American Standard 0625.000 dimensions Glendale, Undercounter Sink, Barrier Free, Vitreous China

	GLENDALE™
	UNDERCOUNTER SINK
BARRIER FREE
	VITREOUS CHINA
GLENDALE™ UNDER COUNTER SINK

•Shell style pattern in bowl

•Made from vitreous china

•Unglazed rim for undermount

•Front overfl ow with option of rear overfl ow installation for Barrier Free

•Center drain outlet

•Supplied with mounting kit (047194-0070A) and template

❏0625.000

464 x 381mm

(18-1/4" x 15")

Bowl Sizes: 406mm (16") wide

311mm (12-1/4") front to back 152mm (6") deep

Compliance Certifications - Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures

A

B

51mm

(2) MIN.

76mm

(3)

EDGE OF

COUNTER

TOP

CUTOUT

381mm	45°
(15)	C/L

25mm464mm

(1)(18-1/4)

SEALING		19mm
COMPOUND	(3/4)

		197mm
*343mm		(7-3/4)
(13-1/2)			16mm
			(5/8)
	*273mm
(10-3/4)

SUPPLIES

AS REQ'D.

FINISHED WALL				610mm
OR SPLASHBACK
			76mm	(24)
OVERFLOW			(3)
41mm
(1-5/8)	180mm
	(7-5/8)		203mm
			(8)	DRAWING FOR
			MIN.
				DIMENSIONAL
	C/L OF	864mm		PURPOSES ONLY.
				IT IS NOT AN EXACT
	OUTLET	(34)		REPRESENTATION.
MOUNTING		686mm
		(27)
CLIP
		MIN.
(SEE DETAIL)					152mm
					(6)
					MAX.
COUNTERTOP			BARRIER FREE		229mm
(BY OTHERS)
				CLEARANCE
					(9)
					MIN.
DETAIL OF MOUNTING CLIP
	(KIT No.47194.0070A)
	BRASS	19mm
		(3/4) MIN.
	INSERT
LAVA
203mm
(8)
		CLIP

787mm (31) 864mm (34)

To Be Specified:

❏Color:

❏Faucet*:

❏Faucet Finish:

❏Supplies:

❏1-1/4" Trap:

* See faucet section for additional models available

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES -

CHECK LOCAL CODES.

With overfl ow to the rear and countertop 864mm (34”) from fi nished fl oor. Lavatory installed 51mm (2”) MIN. from front edge of countertop. Countertop thickness to be 25mm (1”) maximum.

			MACH.
1-1/4 O.D.			SCREW
WASTE			REFER TO INSTRUCTIONS
1-1/4 O.D.	FINISHED FLOOR		PROVIDED WITH KIT FOR
TAILPIECE			ADDITIONAL INFORMATION
FITTING	A	B
CENTER-SET	27mm(1-1/16)	102mm(4)
SPREAD	32mm(1-1/4)	203mm(8)

NOTES:

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.

▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IN-FIELD ADJUSTMENT OF POP-UP ROD EXTENSION REQUIRED. PROVIDE A 2-1/2" OFF-SET BEND FOR PROPER OPERATION.

USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT. SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	J47
© 2006 American Standard Inc.		Revised 5/06