American Standard 1340.255 installation instructions Installation, Metering, Instructions

	Installation
METERING	Instructions
	1340.225
Center Set Faucets	1340.255
	1340.265

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

1340.225	1340.255	￿￿￿￿￿￿￿
		1340.265

Certified to comply with ANSI A112.18.1

￿TOOLS REQUIRED ￿

￿￿￿￿￿￿￿￿￿￿￿￿ Channel Locks Adjustable Wrench Plumbers' Putty or Caulking 2.5mm Hex Wrench

INSTALL FAUCET

CAUTION

Turn off hot and cold water supplies before beginning.

Apply a bead of PUTTY along the edge of the underside of the FAUCET (1).

Insert faucet SHANKS through holes of SINK or

MOUNTING SURFACE.

Install GASKET (2), FRICTION WASHER (3), DEEP WASHER (4) and LOCK NUT (5). onto SHANKS (6).

Tighten LOCK NUTS (5) firmly to secure FAUCET (1).

1

SHANK

PUTTY

SINK OR

MOUNTING

SURFACE

2

3

4

MAKE WATER SUPPLY CONNECTIONS

NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE PURCHASED SEPARATELY.

Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE SUPPLIES (1) or 3/8" O.D. BULL-NOSE RISERS (2).

Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length.

1 COUPLING NUT

2

FERRULE

5