American Standard 2034.014 warranty CHAMPION 4 ELONGATED RIGHT HEIGHT ONE-PIECETOILET

CHAMPION® 4 ELONGATED RIGHT HEIGHT™ ONE-PIECE TOILET

VITREOUS CHINA

CHAMPION® 4 ELONGATED RIGHT HEIGHT™ ONE-PIECE TOILET

❑2034.014

•Vitreous china

•EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® 4 Flushing System performance platform

•4" non-adjustable, piston action Accelorator™ flush valve

•16-1/2" rim height for accessible applications

•Elongated siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Chrome trip lever

•100% factory flush tested

•2 bolt caps

•10 year warranty

Nominal Dimensions:

756 x 451 x 749mm

(29-3/4" x 17-3/4" x 29-1/2")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures- includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

❏Color:

❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏Trip Lever 738772-XXX0A:

❏002 Chrome (supplied)

❏068 Blackened Bronze

❏099 Polished Brass

❏295 Satin Nickel

❏Seat:

❏Champion® Slow Close Elongated #5325.010

❏EverClean® Elongated Seat, with Cover and Slow Close Snap-Off Hinges #5321.110

❏Supply with Stop (by other):

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

•When installed, top of seat meets minimum requirement of 432 to 483mm (17" to 19") from the finished floor.

© 2008 AS America Inc.

FINISHED WALL
	756mm
44mm (1-3/4)	(29-3/4)
	C/L OF SEAT
203mm			425mm
	POST HOLES
			(16-3/4)
(8)
	140mm (5-1/2)
	CENTERS
	470mm
	(18-1/2)
25mm
(1)
		SUPPLY	451mm
			(17-3/4)
		AS		749mm
		REQ'D		(29-1/2)
		419mm
95mm		(16-1/2)	178mm
(3-3/4)			(7)
32mm	13mm	*114mm
(1-1/4)	(1/2)	(4-1/2)		FINISHED
273mm	343mm			FLOOR
(10-3/4)	(13-1/2)		273mm
305mm			(10-3/4)

(12)C/L OF OUTLET

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K8

Revised 2/08