American Standard 2057.212 dimensions Champion Select Elongated Right Height Toilet

CHAMPION® SELECT ELONGATED RIGHT HEIGHT™ TOILET

VITREOUS CHINA

CHAMPION® SELECT ELONGATED

RIGHT HEIGHT™ TOILET

❑2057.212

•Vitreous china

•EverClean™ anti-microbial glaze (available Summer 2006)

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® Flushing System performance platform

•3" non-adjustable, fl apper-free fl ush valve

•16-1/2" rim height for accessible applications

•Elongated siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect™ tank/bowl coupling system

•Trip lever color-matched to toilet

•Sweeping pier on bowl

•100% factory fl ush tested

•2 bolt caps

•10 year warranty

❑3225.016 Elongated Right Height™ Bowl

❑4272.216 Tank

Nominal Dimensions:

772 x 489 x 873mm

(30-3/8" x 19-1/4" x 34-3/8")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specifi cation for Non-Adjustability - July, 2003 revision

FINISHED WALL
	772mm
	(30-3/8)
19mm ± 6mm				489mm
(1 ± 1/4)				(19-1/4)
	216mm
	(8-1/2)
	470mm
	(18-1/2)
				356mm
	C/L OF SEAT POST HOLES			(14)
	140mm (5-1/2 CENTERS)
				873mm
		SUPPLY		(34-3/8)
			AS
83mm 1/4)-(3			REQ'D
		419mm
		(16-1/2)
			*254mm(10)
	16mm		152mm
	(5/8)		(6)
264mm		FINISHED		254mm
	362mm	FLOOR
(10-3/8)				(10)
	(14-1/4)
305mm	C/L OF OUTLET
(12)

To Be Specified:

❏Color:

❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏Seat: (please specify color)

❏Champion® Slow Close Elongated #5325.010

❏Rise & Shine Elongated #5324.019

❏Laurel Elongated #5311.012

❏Supply with stop:

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	K26
© 2006 American Standard Inc.		Revised 5/06