American Standard 2067.014 dimensions Skyline Champion Elongated Right Height Toilet

SKYLINE CHAMPION® 4

ELONGATED RIGHT HEIGHT™ TOILET

VITREOUS CHINA

SKYLINE CHAMPION® 4

ELONGATED RIGHT HEIGHT™ TOILET

❏2067.014

•Vitreous china

•EverClean® surface inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® 4 Flushing System performance platform

•4" non-adjustable, piston action Accelerator™ flush valve

•16-1/2" rim height for accessible applications

•Elongated siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect® tank/bowl coupling system

•Chrome-plated trip lever

•Sweeping pier on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❏3225.016 Elongated Right Height™ Bowl

❏4077.014 Tank

Nominal Dimensions:

30-3/8" x 19-5/8" x 34-3/8" (772 x 498 x 873mm)

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass

Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non- Adjustability - July, 2003 revision

To Be Specified:

❏Color: 020 White

❏Seat: (please specify color)

❏Champion® Slow Close Elongated #5325.010

❏Rise & Shine Elongated #5324.019

❏Laurel Elongated #5311.012

❏Supply with stop:

FINISHED WALL
	772mm
	(30-3/8)
32mm ± 6mm				498mm
(1-1/4 ± 1/4)				(19-5/8)
	235mm
	(9-1/4)
	470mm
	(18-1/2)
				356mm
	C/L OF SEAT POST HOLES			(14)
	140mm (5-1/2 CENTERS)
				873mm
		SUPPLY		(34-3/8)
			AS
83mm 1/4)-(3			REQ'D
		419mm
		(16-1/2)
			*254mm(10)
	16mm		152mm
	(5/8)		(6)
264mm		FINISHED		254mm
	362mm	FLOOR
(10-3/8)				(10)
	(14-1/4)

305mm C/L OF OUTLET (12)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided page

	K29
© 2008 AS America Inc.		Revised 2/08