American Standard 2373.401 installation instructions Installation, Instructions, Enfield

	Installation
ENFIELD	Instructions
	2373.401
BIDET FITTING
	2373.421
and VACUUM BREAKER
with EverClean™ Finish

Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.

EverClean Finish

•One wipe effortlessly removes spots

•Eliminates the need for cleaners and scrubbing

•Permanent surface protectant remains beautiful for the life of the faucet

•EverClean™ available on: Polished Chrome, Satin Nickel,

Stainless Steel, Polished Brass (or any combination of these finishes)

Certified to comply with ASME A112.18.1M U.S. Patent No. 5,819,789

.     
3 & 7 
  

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Required Tools

*Wrench

Flat Blade Screwdriver

Adjustable Wrench Channel Locks 5VCJOH
$VUUFS

Phillips Screwdriver *Supplied with Fitting

Roughing-in Dimensions

		FINISHED
		WALL
BIDET OUTLINE	TRANSFER VALVE
	(FOR FLUSHING
IS SYMBOLIC	RIM OR SPRAY)
DOUCHE	7/8 DIA.
SPRAY
	ADJ. 1-1/4	2-1/8
	TO 2-1/4	DIA.
3-7/8	1-3/8
	DIA.
	5-1/2
		1-1/4 O.D. TAILPIECE

MOUNTING BIDET FAUCET

	CAUTION	Turn off hot and cold water
		supplies before beginning.

Place MOUNTING NUTS (1) onto the VALVE BODIES

(2)and insert VALVE BODIES (2) through outside holes, from underside of the BIDET LEDGE. Drop the RUBBER RING (3) over the VALVE BODIES (2) and thread DECK ADAPTER (4) onto VALVE BODIE (2) until it locks against the internal stop.

Tighten the MOUNTING NUT (1) to secure the VALVE BODIES (2).

Remove MOUNTING NUT (9), FRICTION RING (10) and UPPER GASKET (7) from TRANSFER VALVE (8) and insert TRANSFER VALVE (8) into the center forward hole of BIDET.

Replace UPPER GASKET (7) and FRICTION RING (10). Position the side threaded outlet rearward and secure MOUNTING NUT (9). Thread ESCUTCHEON (5) onto TRANSFER VALVE (8) until it seats against the

BIDET LEDGE.

8 TO 12

(C)

1-3/16 DIA.

1-1/4 MAX.

FINISHED

FLOOR

DIVERTER AND VACUUM BREAKER ASSEMBLY

(H)

2-1/4 DIA.

4-1/4

FOR GROUND JOINT CONNECTION OR 1/2" O.D. SLIP (INLETS)

REAR VIEW WITH WALL REMOVED

5	9
	10

4 3

BIDET

LEDGE

2

HOT COLD

17

8