American Standard 2447.000 warranty SPACESAVER CADET 3 ELONGATED COMPLETE TOILET

SPACESAVER CADET® 3 ELONGATED COMPLETE TOILET

❑2447.000

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Space saving compact design - Elongated bowl fits in the same space as a round front toilet

•12" (305mm) Rough-in

•EverClean® surface inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface

•Featuring the Cadet® 3 Flushing System

•Elongated siphon action jetted bowl with 2-1/8" trapway

•Internal trapway area fully glazed

•Generous 8" x 9" water surface area

•Close coupled tank with flat tank cover for superior storage

•Oversized 3" Flush Valve with Chemical Resistant Flapper

•Speed Connect® tank to bowl coupling system

•Sanitary dam on bowl with four point tank stabilization

•2 color match bolt caps

•Chrome Trip Lever

•Color matched solid plastic seat with cover

•Wax ring gasket with closet bolts

•100% factory flush tested

•5 year warranty

Nominal Dimensions:

718 x 438 x 733mm

(28-1/4" x 17-1/4" x 28-7/8")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability

To Be Specified:

❏Color: ❏ White

❏Supply with stop

SPACESAVER CADET® 3 ELONGATED COMPLETE TOILET

VITREOUS CHINA

	FINISHED WALL
	716mm
	(28-1/4)		439mm
	191mm
15mm	(7-1/2)		(17-1/4)
	(5/8)
	470mm
	(18-1/2)
	C/L OF SEAT POST
	HOLES 140mm
	(5-1/2 CENTERS)		733mm
102mm (4)		AS
			(28-7/8)
		SUPPLY
		REQ'D.	355mm
			(14)

		381mm
		(15)
			*203mm
			(8)
267mm	296mm		236mm
(10-1/2)	(11-5/8)	FINISHED	(9-5/16)
305mm		FLOOR	*152mm
	C/L OF OUTLET		(6)
(12)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	K99
© 2008 AS America Inc.		Revised 2/08