American Standard 256.1XX warranty Installation, Roughing-in Dimensions, Tools Required Fig

ADA Compliant

Fig. 1 Roughing-in Dimensions

159mm		154mm
(6-1/4)
		(6-1/16)	126mm
			(5)
		55.5mm
		(2-3/16)
81mm		49mm	32mm (1-1/4)
		(2)	125mm
(3-3/16)
			(4-7/8)
		114mm
		(4-1/2)
	381mm		1524mm
	(15)	500mm
			(60)
		(20)

3/8" COMP.

GENERAL DESCRIPTION:

Electronic faucet with proximity operation. Vandal resistant solid brass construction single post mounting. Operates on DC (battery) or AC permanent power. Water pressure range from 20 to 125 psi. In-line strainer for solenoid is integral. Single inlet 3/8 compression, built-in checks, and flexible stainless steel 15" reach inlet hose for spout connection.

CODES AND STANDARDS:

These products meet or exceed the following coded standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

TOOLS REQUIRED; Fig. 2

1Channel Locks

2Adjustable Wrench

3Plumbers' Putty or Caulking

4 Phillips Screwdriver

5 Flat Blade Screwdriver

6 Electric Drill & 1/4" Drill Bit

7 Tape Measure

INSTALLATION

1INSTALL SPOUT ASSEMBLY; Fig. 1

	Turn off hot and cold water
CAUTION
	supplies before beginning

1.Insert WIRES (1), FLEX HOSE (2) and SPOUT SHANK (3) through center hole of mounting surface.

Fig. 1a.

2.Assemble "C" WASHER (4), STAR WASHER (5)

and LOCKNUT (6) onto threads of SPOUT SHANK (7) from underside of mounting surface. Fig. 1b.

3.Align FAUCET and tighten LOCKNUT (6). Fig. 1b.

Fig. 2
1		2
3	7
		6
4	10'
5

Fig. 1a

1

	2	3
Fig. 1b		7
		4
		6
		5

2