INSTALLATION INSTRUCTIONS
ELLISSE OVAL™
HIGH GLOSS ACRYLIC
2709.XXXW SERIES WHIRLPOOL / BATHING POOL
1759 mm |
| |
| ||
240 mm | OUTLINE OF | |
CUTOUT | ||
| ||
ON/OFF |
| |
SWITCH |
| |
305mm(12) X 229mm(9) | PUMP | |
CUTOUT IN FLOOR FOR DRAIN | ||
|
978 mm
THANK YOU...
for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical
489mm
76mm
(3)
CL OF DRAIN
OUTLET
86mm
38mm
502mm
464mm
PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
connections for a whirlpool.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
List of Optional Components (not included):
•
*see your American Standard Distributor
List of Required Components (not included):
•Drain 1583.470*
•Bath Filler*
THREADS35mm
TAILPIECE
98mm
* see your American Standard Distributor
GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL
INSTALLED SIZE |
|
|
|
|
| ||||||||||||||||||
WEIGHT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 107 Lbs. (49 Kg.) | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
WEIGHT w/WATER |
|
|
|
|
|
|
|
|
|
| 640 Lbs. (291 Kg.) | ||||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||||||
GAL. TO OVERFLOW |
|
|
|
|
|
|
|
|
|
|
|
|
| 64 Gal. (243 L) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
WHIRLPOOL MIN. OPERATING VOL. |
|
|
|
|
|
|
|
| 53 Gal. (201 L) | ||||||||||||||
|
|
|
|
|
|
| |||||||||||||||||
BATHING WELL AT SUMP |
|
|
|
| 45 x 23 In. (1143 x 584mm) | ||||||||||||||||||
BATHING WELL AT RIM |
|
|
|
|
|
| 63 x 32 In. (1600 x 813mm) | ||||||||||||||||
|
|
|
|
|
| ||||||||||||||||||
WATER DEPTH TO OVERFLOW |
|
|
|
|
|
|
|
|
| 13 In. (330mm) | |||||||||||||
|
|
|
|
|
|
|
|
| |||||||||||||||
FLOOR LOADING |
|
|
|
|
|
| 35 Lbs./Sq.Ft. (166 Kgs./Sq.m) | ||||||||||||||||
(PROJECTED AREA) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
PTS. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 25.6 | |
CUBE (FT3) |
|
|
|
|
|
| 49.4 | ||||||||||||||||
|
|
|
|
|
| ||||||||||||||||||
|
|
| WHIRLPOOL ELECTRICAL SPECIFICATIONS | ||||||||||||||||||||
SYSTEM II PUMP |
|
|
|
|
|
|
|
| 2.1 HPR, 15.6 AMPS, 120V. | ||||||||||||||
|
|
|
|
|
|
|
| ||||||||||||||||
GENERAL INSTALLATION INFORMATION
List of Required Tools and Supplies:
Tools | Supplies | ||
• | Level | • | Nails |
• | Tape Measure | • | Putty |
• | Pipe Wrench | • | Caulking (waterproof) |
• | Slip Joint Pliers | • | 1 x 3 or 2 x 2 |
• | Screw Driver |
| Stringers |
• | Standard | • | Drop Cloth |
| Woodworking Tools | • | 20 amp GFCI |
• | Personal Safety |
| Outlet |
| Equipment | • | Cement, Plaster, |
• | Caulking Gun |
| Grout |
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR
© AS America, Inc. 2009
