American Standard 2732.002 Renaissance Whirlpool And Bathing Pool, High Gloss, Revised 2/08

RENAISSANCE™ WHIRLPOOL

AND BATHING POOL

HIGH GLOSS

60"

(1524mm)

12"

(305mm)

16-1/2"

(419mm)

3"

(76mm)

33"	6"
(838mm)

(152mm)

CUT OUT IN FLOOR

FOR DRAIN

5-7/8" (149mm)

8-1/2"

(216mm)

33"

(838mm)

C/L OF

OVERFLOW

19-3/4"(H) (502mm)

18-1/4"(C)

(464mm)16-1/2" (419mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2732 WHIRLPOOL

INSTALLED SIZE			60 x 32-3/4 x 19-3/4 In.
			(1524 x 832 x 502mm)
WEIGHT						65 Lbs. (29 Kg.)
WEIGHT w/WATER					524 Lbs. (237 Kg.)
GAL. TO OVERFLOW						55 Gal. (208 L.)
MIN. OPERATING GAL.							41 Gal. (155L.)
BATHING WELL AT SUMP					40-1/2 x 20-1/2 In.
				(1029mm x 521mm)
BATHING WELL AT RIM	52-1/2 x 26-1/2 In. (1334mm x 673mm)
WATER DEPTH TO OVERFLOW					13-3/4 In. (349mm)
FLOOR LOADING		38 Lbs./Sq. Ft. (187 Kgs/Sq. m.)
(PROJECTED AREA)

	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP	1.25 HP, 9.7 AMPS, 120V.

NOTES:

GENERAL SPECIFICATIONS FOR 2732 BATHING POOL

INSTALLED SIZE			60 x 32-3/4 x 19-3/4
		(1524 x 832 x 502mm)
WEIGHT					51 Lbs. (23 Kg.)
WEIGHT w/WATER				509 Lbs. (230 Kg.)
GAL. TO OVERFLOW					55 Gal. (208 L.)
BATHING WELL AT SUMP	40-1/2 x 20-1/2 In. (1029 x 521mm)
BATHING WELL AT RIM	52-1/2 x 26-1/2 In. (1334 x 673mm)
WATER DEPTH TO OVERFLOW					13-3/4 (349mm)
FLOOR LOADING		37 Lbs./Sq.Ft. (182 Kgs./Sq.m)
(PROJECTED AREA)

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. OPTIONAL 3 WALL TILING BEAD. KIT AND APRON No.9260.018 AVAILABLE AND MUST BE ORDERED SEPARATELY. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	H68
© 2008 AS America Inc.		Revised 2/08