American Standard 2740.118 Whirlpool and Bathing Pool, General Specifications for 2740 Whirlpool

20 x 46 (508 x 1168mm ) 25-1/2 x 55-1/2(648 x 1410mm )

11-1/2 (292mm)

37 Lbs./Sq.Ft. (179 Kgs./Sq.m)

16.7

33.0

59-7/8 x 30 x 19-1/4 (1521 x 762 x 489mm) 70 Lbs. (32 Kgs.)

462 Lbs. (208 Kgs.)

47 Gal. (178 L)

COLONY™ 5’ X 30” w/INTEGRAL APR ON

WHIRLPOOL AND BATHING POOL

HIGH GLOSS ACRYLIC

										59-7/8
			59-7/8				6-1/4		(1521mm)		WATER
6-1/4		(1521mm)					(159mm)
					WATER		C/L OF DRAIN				RETENTION
(159mm)
					RETENTION		3/4				FLANGE
C/L OF DRAIN
											(3 SIDES)
3/4					FLANGE		(19mm)
					(3 SIDES)
(19mm)							FINISHED
FINISHED							SEE FITTING WALL
SEE FITTING WALL							SPECS FOR				14-1/8
SPECS FOR						14-1/8	DIMENSIONS				(359mm)
DIMENSIONS
						(359mm)	1-1/2 O.D.
1-1/2 O.D.							TAILPIECE
TAILPIECE
						ON/OFF	29-7/8
29-7/8							(759mm)
					PUMP	SWITCH
(759mm)							C/L OF
C/L OF
							SUPPLIES
SUPPLIES
HORIZONTAL TAILPIECE			(1) AIR VALVE		ACCESS TO PUMP/MOTOR		HORIZONTAL TAILPIECE
							ABOVE FLOOR OUTLET
					THROUGH REMOVABLE
ABOVE FLOOR OUTLET
		(6) JETS			FRONT ACCESS PANEL		1-1/2 (38mm)
1-1/2 (38mm)											C/L OF
					C/L OF
											SHOWER ARM
					SHOWER ARM
											FINISHED
					FINISHED
											WALL
					WALL
							OPTIONAL TO
OPTIONAL TO								7/8 WATER			C/L OF
	7/8 WATER				C/L OF		FINISHED FLOOR
FINISHED FLOOR							USUALLY BETWEEN	RETENTION			VALVES
USUALLY BETWEEN	RETENTION				VALVES
							65 & 78	FLANGE
65 & 78	FLANGE
							(1651 & 1981mm)	(3 SIDES)
(1651 & 1981mm)	(3 SIDES)				C/L OF				12		C/L OF
		12						C/L OF
	C/L OF								(305mm)		SPOUT
		(305mm)			SPOUT
	OVERFLOW							OVERFLOW	OPT.
		OPT.	4					3		4	■ LEVELING STRINGER
	3			■ LEVELING STRINGER
									(102mm)
		(102mm)						(76mm)			NOT FOR SUPPORT
	(76mm)				NOT FOR SUPPORT
TOP OF						UNDERSIDE	TOP OF				UNDERSIDE
							DECK				OF DECK
DECK	19-1/4					OF DECK		19-1/4
											19
	(489mm)				19			(489mm)
					(483mm)						(483mm)
ROUGH							ROUGH
FLOOR							FLOOR
	3-3/4				2-1/2			3-3/4			2-1/2
	(95mm)							(95mm)
					(64mm)						(64mm)
BATH SUPPORT							BATH SUPPORT
	MATERIAL							MATERIAL

GENERAL SPECIFICATIONS FOR 2740 WHIRLPOOL

INSTALLED SIZE		59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
WEIGHT							105 Lbs. (47 Kgs.)
WEIGHT w/WATER						480 Lbs. (216 Kgs.)
GAL. TO OVERFLOW									45 Gal. (171 L)
WHIRLPOOL MIN. OPERATING VOL.									38 Gal. (144 L)
BATHING WELL AT SUMP				20 x 46 (508 x 1168mm )
BATHING WELL AT RIM			25-1/2 x 55-1/2(648 x 1410mm )
WATER DEPTH TO OVERFLOW								11-1/2 (292mm)
FLOOR LOADING			39 Lbs./Sq.Ft. (188 Kgs./Sq.m)
(PROJECTED AREA)
PTS.										16.7
CUBE (FT3)											33.0
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP					1 HP, 9.9 AMPS,120V.

NOTES:

GENERAL SPECIFICATIONS FOR 2740 BATHING POOL

INSTALLED SIZE WEIGHT WEIGHT w/WATER

GAL. TO OVERFLOW BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA)

PTS. CUBE (FT3)

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2740.118).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

© 1999 American Standard Inc.