American Standard 2775.018WC dimensions Cadet Corner Whirlpool & Bathing Pool, Bathing Pool only

CADET™ CORNER

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

CADET CORNER WHIRLPOOL & BATHING POOL

❏2775.018W Whirlpool featuring System I

•Acrylic with fiberglass reinforcement

•Pre-leveled tub bottom

•Dual, backrest positions

•Molded-in arm rests

•2.0 HP single speed, self-draining pump/motor

•Factory installed power cord with plug

•Eight multi-directional and flow-adjustable

jets including:

-Two Ideal-flow jets

-Two body massage jets

-Four recessed back-rest jets (two in each backrest)

•Deck-mounted air switch On/Off

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

❏2775.018WC Stay Clean™ Whirlpool Massage Featuring System I:

•Same as 2775.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

❏2775.002 Bathing Pool only

Nominal Dimensions: 2159 x 1524 x 502mm (85” x 60” x 19-3/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

To Be Specified - Required:

❏Color:

❏Bath Filler: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Jet Trim Ring Kit: 9860.200-two per kit (Specify finish)

❏Universal Tile Bead Kit: 751755-100

❏Grab Bar Kit: 9822.200-two per kit (specify finish)

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

BV-21

Rev. 3/03 © 2003 American Standard Inc.